Latest Realtek HD Audio Driver Version

[Dwarf]

Re: New Realtek HD audio driver update

Thanks for the heads up. What I would like to know is this: When are Realtek going to do something about their appalling download speeds?

 

[Brink]

Re: New Realtek HD audio driver update

It sure would be nice Dwarf if they did.

 

[Mr GRiM]

Re: New Realtek HD audio driver update

Wow did you guys talk to them about the time thing because I selected the second mirror and it just downloaded it in 1 minute and 5 seconds. This is the first time I done it with IE and I also have Bitcomet installed and it used that as a download manager and I had speed of up to 1050kbps.

 

[Brink]

Re: New Realtek HD audio driver update

WOW Mr GRiM, I do not know how you managed that download speed from them. It always seemed like they had nothing but the old 56K dial-up modems available when I try.

 

[neon.dead]

Re: New Realtek HD audio driver update

MOTHERBOARD -- M2V-MX SE
ASUSTeK Computer Inc.

Tried ti install driver from the page above
and restaarted pc 3 times no sound in front pannel back pannel fine from right after installing 1st time
Facing problem on both ma Xp and Vista
Very tired , was fine on my previous m/board :sa:

sshots attached so u can tell if any place to disable front pannel detection
and at time of sshot front pannel headphones attached.....

 

[DarkRadeon]

Re: New Realtek HD audio driver update

Hi everyone.

I have an issues form driver version R2.08 (2.09, 2.10 and 2.11 too): on may mainboard with an ALC 880 HD Audio the green output front panel doesn't work with my headphones. Only the red output of the mic seems to work correctly. "Mute the rear output device" is enable, "disable front panel jack detection" is off (this one I tried to enable as suggest in other forums and google, but nothing change). And I don't understand why the digital output and the digital input are enable, if i don't have nothing plugged in them!

Only the R2.07 works correctly: three driver versions, same bug! I wrote to Realtek support mail but nobody answer me!



(NB: the language is Italian, I enable English Language only in the Realtek Sound Manager)

PS: sorry for my bad English.


Here some pics:

 

[Lurchie]

Re: New Realtek HD audio driver update

Hi,

I just purchased a mic and needed some help. I have the audio codec ALC889A which worked absolutely fine playing audio, the drivers were from July 2007.

However everytime I plug the mic in both front and back panel it recognises the mic being plugged in but no sound can be heard.

I read through about 10/15 pages of this topic and have updated to the latest drivers, but once again the pop up box appears recognising a mic has input but nothing happens. I have 5.1 surround sound speakers plugged in too.

Any ideas why this may be happening? I'm running Vista Ultimate 64.

Any help is appreciated.

Thanks.

 

[MrNeeds]

Re: New Realtek HD audio driver update

Hi everyone.

I have an issues form driver version R2.08 (2.09, 2.10 and 2.11 too): on may mainboard with an ALC 880 HD Audio the green output front panel doesn't work with my headphones. Only the red output of the mic seems to work correctly. "Mute the rear output device" is enable, "disable front panel jack detection" is off (this one I tried to enable as suggest in other forums and google, but nothing change). And I don't understand why the digital output and the digital input are enable, if i don't have nothing plugged in them!

Only the R2.07 works correctly: three driver versions, same bug! I wrote to Realtek support mail but nobody answer me!



(NB: the language is Italian, I enable English Language only in the Realtek Sound Manager)

PS: sorry for my bad English.


Here some pics:

you do seem to have a bit of trouble there DarkRadeon, i think you need to set devices as independent audio inputs rather than tying them up, secondly, you seem to have a lot of devices connected, example... soundblaster audio devices, this might be a conflict of devices which could be causing the issue.

 

[johngalt]

Re: New Realtek HD audio driver update

FWIW - when downloading, I always avoid any server IP with the first octet being a 2 digit number - many trials have shown that the 212 octet IP address is *usually* the speediest, with me reaching speeds as fast as 300 KB/s.

 

[the highlander]

Re: New Realtek HD audio driver update

I am wondering if its possible to use a 5ch stereo of some sorts??? i mean, if im watching a movie I want it to output to ALL my speakers.

I have a denon and this is by far the most useful mode I've ever had!

 

[Dwarf]

Re: New Realtek HD audio driver update

Hi the highlander,

Have a look at this post: http://www.vistax64.com/sound-audio/199762-why-does-5-1-not-work-please-help-me-guys.html#post919333

 

[the highlander]

Re: New Realtek HD audio driver update

yes speaker fill is enabled and it makes a difference, but its not exactly what I was looking for. Still.. I get a lot more sound from the front than the rears.

 

[johngalt]

Re: New Realtek HD audio driver update

According to the various setups in the RealTek drivers, ther is Stereo, 5.1 7.1 and optionally one other (I beleive it is laptop speakers). YMMV

 

[DarkRadeon]

Re: New Realtek HD audio driver update

Hi everyone.

I have an issues form driver version R2.08 (2.09, 2.10 and 2.11 too): on may mainboard with an ALC 880 HD Audio the green output front panel doesn't work with my headphones. Only the red output of the mic seems to work correctly. "Mute the rear output device" is enable, "disable front panel jack detection" is off (this one I tried to enable as suggest in other forums and google, but nothing change). And I don't understand why the digital output and the digital input are enable, if i don't have nothing plugged in them!

Only the R2.07 works correctly: three driver versions, same bug! I wrote to Realtek support mail but nobody answer me!



(NB: the language is Italian, I enable English Language only in the Realtek Sound Manager)

PS: sorry for my bad English.


Here some pics:

you do seem to have a bit of trouble there DarkRadeon, i think you need to set devices as independent audio inputs rather than tying them up, secondly, you seem to have a lot of devices connected, example... soundblaster audio devices, this might be a conflict of devices which could be causing the issue.

I have an audigy2 value another HD AUDIO for the HMDI output of my GPU too(which one is disable 'couse I don't need audio via HDMI), but only with new drivers I got this problem. I tried to set independent devices from the rear output devices and the fornt panel audio but nothing change. It isn't a conflict between my audigy2 and the ALC880 or the HDMI audio of my Radeon 3870, otherwise with the old drivers I should got the same issues, but it isn't so.

PS: sorry for my really crappy English ç______ç

 

[berserker]

Re: New Realtek HD audio driver update

2.12 has just been posted. Driver version is 6.0.1.5764.

 

[Brink]

Re: New Realtek HD audio driver update

Thank you Berserker for the update. The first post has been updated.

Shawn

 

[DarkRadeon]

Re: New Realtek HD audio driver update

2.12 has just been posted. Driver version is 6.0.1.5764.

Any fix? Change log? U_U I am tired to try to see if they fix the fornt panel output bug .-.

 

[Brink]

Re: New Realtek HD audio driver update

Hi DarkRadeon,

You can download the Readme PDF file to see what all is new with this version from the link at the first post in this thread. The first post also has a quick list of what's new to.

 

[berserker]

Re: New Realtek HD audio driver update

2.12 has just been posted. Driver version is 6.0.1.5764.

Any fix? Change log? U_U I am tired to try to see if they fix the fornt panel output bug .-.

Here's what the readme says about 2.12:

Add/Fix
1.) Driver :
1. Customizations.
2. Support encryption feature for ALC670.

 

[Dwarf]

Re: New Realtek HD audio driver update

Dear Sirs,

Is there any way that you can improve the performance and speed of your website and download servers? Even the main page is slow to load up. I don't have this problem with any other sites, but yours always seems to be very slow and when I do manage to get to the download page, the downloads are very slow, typically under 10KB/sec. I do not find this to be acceptable.

I am still having huge problems with accessing the Realtek website satisfactorily. I have just sent the above message to their Webmaster, and, if they reply, I will post back with what they have to say. I am not going to hold my breath, however.