The User Profile Service failed the logon. User profile cannot be loaded.

How to Fix the Error "The User Profile Service failed the logon. User profile cannot be loaded."

information   Information
When you log on to Vista or Windows 7 using a temporary profile (user account), you receive this error message:

The User Profile Service failed the logon. User profile cannot be loaded.

For more information, see:
Error message when you log on to a Windows Vista-based or Windows 7-based computer by using a temporary profile: "The User Profile Service failed the logon. User profile cannot be loaded"
Note   Note
CAUSE:

The jury is still out on the exact cause, but so far :
  • This issue may occur if the user profile was manually deleted by using the command prompt or Windows Explorer by a user or by some program. A profile that is manually deleted does not remove the security identifier (SID) from the user profile list in the registry. Since the SID is still present, Vista will still try to load the profile by using the ProfileImagePath that points to a nonexistent path. Therefore, the profile cannot be loaded.
  • This can also be a issue with the user profile entering into a backup state.
  • Manually renaming the C:\Users\(User Name) user profile folder.
warning   Warning
If you have this error message below instead, then see: How to Fix the Error "Your user profile was not loaded correctly! You have been logged on with a temporary profile." in Vista

Your user profile was not loaded correctly! You have been logged on with a temporary profile.

Changes you make to this profile will be lost when you log off. Please see the event log for details or contact your administrator.

Tip   Tip
If the steps in the tutorial below do not help or you wish to try this first, then:




STEP ONE
Log on to the Computer
warning   Warning
You must be logged on to an administrator account using either step 1 or 2 below before you can move on to do either the OPTION ONE or OPTION TWO sections.

1. To Log on to another Administrator account.
NOTE: If you do not have another Administrator account, then proceed to step 2.​
A) Go to OPTION ONE or OPTION TWO.​

OR
2. To Boot into Safe Mode and Use the built-in Administrator account
NOTE: You may not need to enable the built-in Administrator account. If this was the only normal administrator account you had, then Safe Mode should automatically boot into the built-in Administrator account.​
Tip   Tip
If you cannot boot into Windows and do not have a Windows installation DVD, then you can create and use the boot disc below to boot into Safe Mode with instead.
Tip   Tip

Windows 7: (Option Two at link)
Vista: (Option One at link)

A) Boot into Safe Mode (in Vista) or Safe Mode (in Windows 7).​
B) If Safe Mode did not boot into the built-in Administrator account, then enable the built-in Administrator account. If it did, then go to step 2D.​
C) Log off in Safe Mode, and then log on to the built-in Administrator account to logon with that account in Safe Mode.​
D) Go to OPTION ONE or OPTION TWO.​




OPTION ONE
To Fix the User Account Profile

1. Open the Start menu.​
2. In the white line (Start Search) area, type regedit and press Enter.​
3. If prompted by UAC, either click on Continue (Vista) or Yes (Windows 7).​
4. In regedit, go to: (See screenshot below step 5)​
Code:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
5. In the left pane, look for the S-1-5..... folder (SID key) with the long number that has .bak at the end of the numbers.​
(See screenshots below steps 6A and 7B)​
NOTE:
A) In the right pane, look at the ProfileImagePath to verify that this is the user account profile that has the error.​
B) You may have another S-1-5..... folder (SID key) above it with the exact same number without the .bak at the end of it.​
6. If you have Two S-1-5..... folders (SID key) with the same Number
NOTE: This is if you have two S-1-5..... folders (SID key) with the exact same numbers, but the second (below) one has the .bak at the end of the numbers.​
A) In the left pane, right click on the first (top) S-1-5..... folder (SID key) that does not have .bak at the end of the numbers and click Rename. (See screenshot below)​
Repair.jpg

B) Add .bk to the end of the numbers. (See screenshot below)​
Repair_bk.jpg

C) In the left pane, right click on the second S-1-5..... folder (SID key) with .bak at the end of the numbers and click Rename. (See screenshot above)​
D) Remove only .bak from the end of the numbers and press Enter. (See screenshot below)​
E) Now go back and Rename the first one with .bk to .bak now at the end of the numbers and press Enter.​
Repar_bak.jpg

F) Go to step 8.​

7. If you have Only One S-1-5..... Folder (SID key) with .bak
NOTE: This is if you only have one S-1-5..... folder (SID key) for your user account with .bak at the end of the numbers.​
A) In the left pane, right click on the S-1-5..... folder (SID key) with .bak at the end of the numbers and click Rename. (See screenshot below)​
B) Remove only .bak at the end of the numbers and press Enter. (See screenshot below and below step 10)​
Repair_Reg2.jpg


8. In the right pane of the one without .bak now, right click on RefCount and click on Modify. (See screenshot below step 10)​
NOTE: If you do not have RefCount, then right click on a empty space in the right pane and click New and DWORD (32 bit) Value, then type RefCount and press Enter. This value for this entry will reset and return back to the original value after you have restarted the computer and logged on to the account.​
A) Type 0 (number) and click on OK. (See screenshot below)​
Modify_RefCount.jpg


9. In the right pane of the one without .bak now, right click on State and click on Modify. (See screenshot below step 10)​
NOTE: This value for this entry will reset and return back to the original value after you have restarted the computer and logged on to the account.​
A) Type 0 (number) and click on OK. (See screenshot below)​
Modify_State.jpg


10. The registry will now look like this for the one without .bak now. (See screenshot below)​
Repair_Reg2.jpg

11. Close regedit.​
12. Restart the computer.​
13. See if you can logon now.​
NOTE: If this still does not help, then either try OPTION TWO below or see the yellow TIP box at the top of the tutorial.​



OPTION TWO
To Delete the User Account and Create Another One

warning   Warning
You can do this option if you do not care about losing the user account and the contents in the user folders. Your programs will still be installed, but you will need to create new shortcuts for them afterwards.

1. Delete the User account profile that this error is for.​
2. Open the Start menu.​
3. In the white line (Start Search) area, type regedit and press Enter.​
4. If prompted by UAC, click on Continue (Vista) or Yes (Windows 7).​
5. In regedit, go to: (See screenshot below step 7)​
Code:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
6. In the left pane, click on one of the S-1-5..... folders (SID key) with the long number in it.​
NOTE: It may have .bak at the end of it.​
A) In the right pane, look at the ProfileImagePath to see if this is the same user account that you deleted in step 1 above.​
B) Repeat step 6 until you find the one that you deleted in step 1 above.​
NOTE: If the user account is not here, then it has already been removed when deleted in step 1. Go to step 9.​

7. To Backup the Registry SID Key
WARNING: You should backup this SID key to be safe in case you delete the wrong one in step 8 below.​
A) Right click on the SID key, and click on Export.​
B) Type in a name and save the REG file to a safe location.​
NOTE: This is your backup. To Restore the Backup, right click on the REG backup file and click on Merge.​
C) Continue on to step 8.​
SID_Reg.jpg


8. To Delete the Registry SID Key
A) Right click on the SID key, and click on Delete. (See screenshot above)​
B) Click on Yes to confirm deletion. (See screenshot below)​
Confirm.jpg


9. Close regedit.​
10. Now, just create a new normal Administrator account.​
11. Restart the computer, and log on to your new account.​
NOTE: If this still does not help, then either try OPTION ONE above or see the yellow TIP box at the top of the tutorial.​
That's it,
Shawn




 

Attachments

  • Repair_reg.jpg
    Repair_reg.jpg
    129.4 KB · Views: 10,868
  • thumb_User_Account.png
    thumb_User_Account.png
    11.4 KB · Views: 659
Last edited by a moderator:
Hi

I had this problem in my Win7 program. It affected my only admin account and so was a real pain. Thanks to this post I was able to fix it by editing the registry in safe mode. Did not want to use system restore in case it did not work and I lost something that required permissions to replace. Your fix worked perfectly - a thousand thanks. I now have 2 admin accounts plus a standard one for everyday use.
 

My Computer

You're mose welcome Terranaut, and welcome to Vista Forums. :)
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics Card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2,
    4TB Samsung 990 PRO PRO M.2,
    8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Keyboard
    Logitech wireless K800
    Mouse
    Logitech MX Master 3
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system,
    Logitech BRIO 4K Pro webcam,
    HP Color LaserJet Pro MFP M477fdn,
    APC SMART-UPS RT 1000 XL - SURT1000XLI,
    Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Graphics card(s)
    NVIDIA GeForce 940MX
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
You're most welcome Deberar, and welcome to Vista Forums. :)
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics Card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2,
    4TB Samsung 990 PRO PRO M.2,
    8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Keyboard
    Logitech wireless K800
    Mouse
    Logitech MX Master 3
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system,
    Logitech BRIO 4K Pro webcam,
    HP Color LaserJet Pro MFP M477fdn,
    APC SMART-UPS RT 1000 XL - SURT1000XLI,
    Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Graphics card(s)
    NVIDIA GeForce 940MX
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
after running Windows Update on 2/9 my laptop it became sluggish and unuseable. after reboot i got the Profile error. i was eventually able to make the registry changes but only after failing to get to regedit or even a C prompt in safe mode, then hard having to hard reboot (power switch) and using [ f8 ] key to get the "Repair your Computer" option (which wasnt there the time before). i ran the startup repair a couple times with one error, but after that i was able to get into safe mode to make the changes.
 

My Computer

Brink, I want to thank you for writting such terrific TUTORIALS! :D In the Foum I found 2 possible solutions to the subject problem. Hopefully,it'll be OK to mention both here.

“The User Profile service failed the logon. User Profile cannot be loaded”.
I have VSITA-HOME-PREMIUM running on a DELL 1720 laptop.

When PC powers up, the following message is displayed on the welcome screen:
“The User Profile service failed the logon. User Profile cannot be loaded”.

This occurred on 2-12-2010. I’ve been running in SAFE-MODE {F8} ever since. Prior to 2-12, the PC has been OK.

Based on the tips in VISTA-FORUMS, I appear to have 2 options for solving this problem.
#1} SYSTEM RESTORE
#2} CORRECT USER-PROFILE IN THE REGISTRY

SYSTEM-RESTORE

  • The last time System-Restore was used was 2007-2008.
  • The System-Restore user-panel offers many dates to select from.
o One is for 2-12, at 5:50pm when the system performed a
SCHEDULED-CHECKPOINT.
oo This was the last day of full PC use. Actually, I stopped creating/updating
files at 7:50.
oo IS THIS BETTER THAN THE WINDOWS-UPDATE
option, below?? ??
o Another date offered is 2-11 at 12:04pm, when the PC installed a


WINDOWS-UPDATE.
  • I have the following questions:
{a} Will I be able to UNDO the changes, i.e., go back to
where it is now?? IS THAT TRUE?????
· Depending on where/what I read, I have seen statements that I can.
But they are NOT consistent.
{b} I read that DATA-FILES like this used in WORD, EXCEL, -
DREAMWEAVER, QUICKEN, etc are not affected.
IS THAT TRUE?????

NOTE: NO PROGRAMS NOR HARDWARE have been installed since
the beginning of the year.

EDIT USER-PROFILE IN REGISTRY {Using “REGEDIT” in START}

  • The current User-Profile-List shows the last TWO records are exactly alike, except the last one has a “.BAK” extension.
  • According to BRINK’S Tutorials, all I have to do is change the last record {which is the good one having the correct ProfileImagePath to “users”. This would be renamed without the extension.
  • The other record, the one with TEMP in the ProfileImagePath and without
“.BAK”, will be renamed with the extension.




MAJOR QUESTION
Which of the two approaches is better for me:
o SYSTEM-RESTORE??????????????
o EDIT USER-PROFILE?????????


Thanks, BRINK {"Shawn"}!!!
 

My Computer

System One

  • Manufacturer/Model
    Dell Inspiron-1720
    CPU
    Intel T-7500
    Memory
    2 gig
    Graphics Card(s)
    nvidia
    Mouse
    logistics bluetooth
Hello Arcee, and welcome to Vista Forums.

Sorry for the late reply, but I missed your request in that wild font size.

Since the restore point is pretty far back, you might give editing the user profile in the registry a try first if you are comfortable doing so. If not, then try the system restore. However, with a older restore point, you will lose anything that was installed after that restore point date.

Hope this helps,
Shawn
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics Card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2,
    4TB Samsung 990 PRO PRO M.2,
    8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Keyboard
    Logitech wireless K800
    Mouse
    Logitech MX Master 3
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system,
    Logitech BRIO 4K Pro webcam,
    HP Color LaserJet Pro MFP M477fdn,
    APC SMART-UPS RT 1000 XL - SURT1000XLI,
    Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Graphics card(s)
    NVIDIA GeForce 940MX
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
Hello Arcee, and welcome to Vista Forums.

Sorry for the late reply, but I missed your request in that wild font size.

Since the restore point is pretty far back, you might give editing the user profile in the registry a try first if you are comfortable doing so. If not, then try the system restore. However, with a older restore point, you will lose anything that was installed after that restore point date.

Hope this helps,
Shawn

Shawn. I'm not sure where I should place my reply. I tried QUICK-REPLY, but submittlal gave me a blank.

HERE'S MY REPLY:
Thanks, Shawn.

I can still use the date of 2-12-2010 which was a Scheduled-CheckPoint. Also available, are 2-11 {Windows Update}, 2-10 {Scheduled-CheckPoint}, 2-10 {Windows Update}.

According to the System-Restore--CHOOSE-CHECKPOINT panel, all those dates are available, plus many more thru 1-31-2010. Are they really still AVAILABLE??

Which of the 2 is better? A DATE set by SCHEDULE-CHECKPOINT or by WINDOWS-UPDATE???

My last install was sometime in January. So any of those dates fit my needs.
If I don't like the results of a selected date, can I:
#1} UNDO the restore?
#2} Try again with another date?
#3} Still try editing the UserProfile in the Registry??

Thanks, again, Shawn for all your help!
 

My Computer

System One

  • Manufacturer/Model
    Dell Inspiron-1720
    CPU
    Intel T-7500
    Memory
    2 gig
    Graphics Card(s)
    nvidia
    Mouse
    logistics bluetooth
Arcee,

I would say go with the restore point dated when you did not have this error to do a system restore with. :)
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics Card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2,
    4TB Samsung 990 PRO PRO M.2,
    8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Keyboard
    Logitech wireless K800
    Mouse
    Logitech MX Master 3
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system,
    Logitech BRIO 4K Pro webcam,
    HP Color LaserJet Pro MFP M477fdn,
    APC SMART-UPS RT 1000 XL - SURT1000XLI,
    Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Graphics card(s)
    NVIDIA GeForce 940MX
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
Shawn,

I am th administrator account, and i cannot log on. I got it into safe mode, and when I tried to rename the first S-I-5 file with all the numbers, it said there was an error and that I could not rename the file. What do I do?
 

My Computer

Hello Tommy, and welcome to Vista Forums.

Are you logged on as an administrator or on the built-in Administrator account in Safe Mode?

What is the exact error message that you got?
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics Card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2,
    4TB Samsung 990 PRO PRO M.2,
    8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Keyboard
    Logitech wireless K800
    Mouse
    Logitech MX Master 3
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system,
    Logitech BRIO 4K Pro webcam,
    HP Color LaserJet Pro MFP M477fdn,
    APC SMART-UPS RT 1000 XL - SURT1000XLI,
    Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Graphics card(s)
    NVIDIA GeForce 940MX
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
Thanks,

It's the admin account that shows the message and I'm not sure how to get to the built-in admin account. But I did reboot in Safe Mode.

Also, the error message said, "The Registry Editor cannot rename S-1-5... Error while renaming key.
 

My Computer

Check step 2B in STEP ONE of this tutorial to see if you are able to log off in Safe Mode to then be able to log on the built-in "Administrator" account.
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics Card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2,
    4TB Samsung 990 PRO PRO M.2,
    8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Keyboard
    Logitech wireless K800
    Mouse
    Logitech MX Master 3
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system,
    Logitech BRIO 4K Pro webcam,
    HP Color LaserJet Pro MFP M477fdn,
    APC SMART-UPS RT 1000 XL - SURT1000XLI,
    Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Graphics card(s)
    NVIDIA GeForce 940MX
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
I enabled built-in admin and was able to correct the problem. But now, I can't disable the built-in admin account using command prompt. do you know another way to disable it?

Thank you Shawn for your help
 

My Computer

Tommy,

Check to be sure that you are not logged into the built-in Administrator account when you try to disable it.
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics Card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2,
    4TB Samsung 990 PRO PRO M.2,
    8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Keyboard
    Logitech wireless K800
    Mouse
    Logitech MX Master 3
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system,
    Logitech BRIO 4K Pro webcam,
    HP Color LaserJet Pro MFP M477fdn,
    APC SMART-UPS RT 1000 XL - SURT1000XLI,
    Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Graphics card(s)
    NVIDIA GeForce 940MX
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
Yeah, I checked that. I just went into a normal user and it still said that I couldn't do it. It keeps giving me, "System Error 5 has occured. Access is denied."
 

My Computer

Ah, that might be why. You would have to log on to another administrator account instead of a Standard account. If you are, then password protect it or change the password for that account to set it back as the default. Afterwards, try disabling the built-in Administrator accounr again to see if it will let you.
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics Card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2,
    4TB Samsung 990 PRO PRO M.2,
    8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Keyboard
    Logitech wireless K800
    Mouse
    Logitech MX Master 3
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system,
    Logitech BRIO 4K Pro webcam,
    HP Color LaserJet Pro MFP M477fdn,
    APC SMART-UPS RT 1000 XL - SURT1000XLI,
    Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Graphics card(s)
    NVIDIA GeForce 940MX
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
Correct. :)
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics Card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2,
    4TB Samsung 990 PRO PRO M.2,
    8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Keyboard
    Logitech wireless K800
    Mouse
    Logitech MX Master 3
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system,
    Logitech BRIO 4K Pro webcam,
    HP Color LaserJet Pro MFP M477fdn,
    APC SMART-UPS RT 1000 XL - SURT1000XLI,
    Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Graphics card(s)
    NVIDIA GeForce 940MX
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
Back
Top