The User Profile Service failed the logon. User profile cannot be loaded.

How to Fix the Error "The User Profile Service failed the logon. User profile cannot be loaded."

information   Information
When you log on to Vista or Windows 7 using a temporary profile (user account), you receive this error message:

The User Profile Service failed the logon. User profile cannot be loaded.

For more information, see:
Error message when you log on to a Windows Vista-based or Windows 7-based computer by using a temporary profile: "The User Profile Service failed the logon. User profile cannot be loaded"
Note   Note
CAUSE:

The jury is still out on the exact cause, but so far :
  • This issue may occur if the user profile was manually deleted by using the command prompt or Windows Explorer by a user or by some program. A profile that is manually deleted does not remove the security identifier (SID) from the user profile list in the registry. Since the SID is still present, Vista will still try to load the profile by using the ProfileImagePath that points to a nonexistent path. Therefore, the profile cannot be loaded.
  • This can also be a issue with the user profile entering into a backup state.
  • Manually renaming the C:\Users\(User Name) user profile folder.
warning   Warning
If you have this error message below instead, then see: How to Fix the Error "Your user profile was not loaded correctly! You have been logged on with a temporary profile." in Vista

Your user profile was not loaded correctly! You have been logged on with a temporary profile.

Changes you make to this profile will be lost when you log off. Please see the event log for details or contact your administrator.

Tip   Tip
If the steps in the tutorial below do not help or you wish to try this first, then:




STEP ONE
Log on to the Computer
warning   Warning
You must be logged on to an administrator account using either step 1 or 2 below before you can move on to do either the OPTION ONE or OPTION TWO sections.

1. To Log on to another Administrator account.
NOTE: If you do not have another Administrator account, then proceed to step 2.​
A) Go to OPTION ONE or OPTION TWO.​

OR
2. To Boot into Safe Mode and Use the built-in Administrator account
NOTE: You may not need to enable the built-in Administrator account. If this was the only normal administrator account you had, then Safe Mode should automatically boot into the built-in Administrator account.​
Tip   Tip
If you cannot boot into Windows and do not have a Windows installation DVD, then you can create and use the boot disc below to boot into Safe Mode with instead.
Tip   Tip

Windows 7: (Option Two at link)
Vista: (Option One at link)

A) Boot into Safe Mode (in Vista) or Safe Mode (in Windows 7).​
B) If Safe Mode did not boot into the built-in Administrator account, then enable the built-in Administrator account. If it did, then go to step 2D.​
C) Log off in Safe Mode, and then log on to the built-in Administrator account to logon with that account in Safe Mode.​
D) Go to OPTION ONE or OPTION TWO.​




OPTION ONE
To Fix the User Account Profile

1. Open the Start menu.​
2. In the white line (Start Search) area, type regedit and press Enter.​
3. If prompted by UAC, either click on Continue (Vista) or Yes (Windows 7).​
4. In regedit, go to: (See screenshot below step 5)​
Code:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
5. In the left pane, look for the S-1-5..... folder (SID key) with the long number that has .bak at the end of the numbers.​
(See screenshots below steps 6A and 7B)​
NOTE:
A) In the right pane, look at the ProfileImagePath to verify that this is the user account profile that has the error.​
B) You may have another S-1-5..... folder (SID key) above it with the exact same number without the .bak at the end of it.​
6. If you have Two S-1-5..... folders (SID key) with the same Number
NOTE: This is if you have two S-1-5..... folders (SID key) with the exact same numbers, but the second (below) one has the .bak at the end of the numbers.​
A) In the left pane, right click on the first (top) S-1-5..... folder (SID key) that does not have .bak at the end of the numbers and click Rename. (See screenshot below)​
Repair.jpg

B) Add .bk to the end of the numbers. (See screenshot below)​
Repair_bk.jpg

C) In the left pane, right click on the second S-1-5..... folder (SID key) with .bak at the end of the numbers and click Rename. (See screenshot above)​
D) Remove only .bak from the end of the numbers and press Enter. (See screenshot below)​
E) Now go back and Rename the first one with .bk to .bak now at the end of the numbers and press Enter.​
Repar_bak.jpg

F) Go to step 8.​

7. If you have Only One S-1-5..... Folder (SID key) with .bak
NOTE: This is if you only have one S-1-5..... folder (SID key) for your user account with .bak at the end of the numbers.​
A) In the left pane, right click on the S-1-5..... folder (SID key) with .bak at the end of the numbers and click Rename. (See screenshot below)​
B) Remove only .bak at the end of the numbers and press Enter. (See screenshot below and below step 10)​
Repair_Reg2.jpg


8. In the right pane of the one without .bak now, right click on RefCount and click on Modify. (See screenshot below step 10)​
NOTE: If you do not have RefCount, then right click on a empty space in the right pane and click New and DWORD (32 bit) Value, then type RefCount and press Enter. This value for this entry will reset and return back to the original value after you have restarted the computer and logged on to the account.​
A) Type 0 (number) and click on OK. (See screenshot below)​
Modify_RefCount.jpg


9. In the right pane of the one without .bak now, right click on State and click on Modify. (See screenshot below step 10)​
NOTE: This value for this entry will reset and return back to the original value after you have restarted the computer and logged on to the account.​
A) Type 0 (number) and click on OK. (See screenshot below)​
Modify_State.jpg


10. The registry will now look like this for the one without .bak now. (See screenshot below)​
Repair_Reg2.jpg

11. Close regedit.​
12. Restart the computer.​
13. See if you can logon now.​
NOTE: If this still does not help, then either try OPTION TWO below or see the yellow TIP box at the top of the tutorial.​



OPTION TWO
To Delete the User Account and Create Another One

warning   Warning
You can do this option if you do not care about losing the user account and the contents in the user folders. Your programs will still be installed, but you will need to create new shortcuts for them afterwards.

1. Delete the User account profile that this error is for.​
2. Open the Start menu.​
3. In the white line (Start Search) area, type regedit and press Enter.​
4. If prompted by UAC, click on Continue (Vista) or Yes (Windows 7).​
5. In regedit, go to: (See screenshot below step 7)​
Code:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
6. In the left pane, click on one of the S-1-5..... folders (SID key) with the long number in it.​
NOTE: It may have .bak at the end of it.​
A) In the right pane, look at the ProfileImagePath to see if this is the same user account that you deleted in step 1 above.​
B) Repeat step 6 until you find the one that you deleted in step 1 above.​
NOTE: If the user account is not here, then it has already been removed when deleted in step 1. Go to step 9.​

7. To Backup the Registry SID Key
WARNING: You should backup this SID key to be safe in case you delete the wrong one in step 8 below.​
A) Right click on the SID key, and click on Export.​
B) Type in a name and save the REG file to a safe location.​
NOTE: This is your backup. To Restore the Backup, right click on the REG backup file and click on Merge.​
C) Continue on to step 8.​
SID_Reg.jpg


8. To Delete the Registry SID Key
A) Right click on the SID key, and click on Delete. (See screenshot above)​
B) Click on Yes to confirm deletion. (See screenshot below)​
Confirm.jpg


9. Close regedit.​
10. Now, just create a new normal Administrator account.​
11. Restart the computer, and log on to your new account.​
NOTE: If this still does not help, then either try OPTION ONE above or see the yellow TIP box at the top of the tutorial.​
That's it,
Shawn




 

Attachments

  • Repair_reg.jpg
    Repair_reg.jpg
    129.4 KB · Views: 10,875
  • thumb_User_Account.png
    thumb_User_Account.png
    11.4 KB · Views: 668
Last edited by a moderator:
Hello Mangoo, and welcome to Vista Forums.

If what Flavius suggested still does not help, then you might see if a System Restore using a restore point dated before this error may be able to help.

Hope this helps,
Shawn
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2, 4TB Samsung 990 PRO PRO M.2, 8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Mouse
    Logitech MX Master 3
    Keyboard
    Logitech wireless K800
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system, Logitech BRIO 4K Pro webcam, HP Color LaserJet Pro MFP M477fdn, APC SMART-UPS RT 1000 XL - SURT1000XLI, Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
ya i have this exact problem, except I AM THE ADMINISTRATOR. so with this message coming up, i cant download any files, delete any files, etc. because i have to get permission from the admin (which is myself) but i cant due to this error mesage. PLEASE HELP. i would appreciate it very much!
 

My Computer

Hello RugbyDude, and welcome to Vista Forums.

If you mean that this is the built-in Administrator account and not the default administrator account given during installation and that you cannot do either steo in the STEP ONE section, then you might see if doing a System Restore using a restore point dated before this error may help.

Hope this helps,
Shawn
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2, 4TB Samsung 990 PRO PRO M.2, 8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Mouse
    Logitech MX Master 3
    Keyboard
    Logitech wireless K800
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system, Logitech BRIO 4K Pro webcam, HP Color LaserJet Pro MFP M477fdn, APC SMART-UPS RT 1000 XL - SURT1000XLI, Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
ya i think im just going to have to get the vista instalation cd and completely restart everything because doing a system restore didnt work. thanks for the help though
 

My Computer

I'm sorry to hear that. I hope it installs smoothly for you.
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2, 4TB Samsung 990 PRO PRO M.2, 8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Mouse
    Logitech MX Master 3
    Keyboard
    Logitech wireless K800
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system, Logitech BRIO 4K Pro webcam, HP Color LaserJet Pro MFP M477fdn, APC SMART-UPS RT 1000 XL - SURT1000XLI, Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD

My Computer

Small question Brink, first thanks for the tutorials they are a real help. The PC has two hard disks and I would like to have all the OS / programs on one and the User files, my documents, videos,etc on the second hard disk. Is there a way to set up that so that when a user opens his / hers profile she / he is automatically routed to the second HDD. Thanks very much for your advise, B regards
 

My Computer

System One

  • Manufacturer/Model
    Lenovo T61p, 3Gb RAM, 100Gb HDD
    CPU
    Centrino pro
    Memory
    3Go
Hello Calabrache,

Sure. You can change the locations for your user folders to be somewhere else instead. This tutorial below can help show you how to, but be sure to read the warnings at the top though to help avoid problems from doing it. Personally I would not recommend doing it unless you just really needed the hard drive space though.

http://www.vistax64.com/tutorials/107990-personal-user-shell-folders-move-location.html

Hope this helps,
Shawn
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2, 4TB Samsung 990 PRO PRO M.2, 8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Mouse
    Logitech MX Master 3
    Keyboard
    Logitech wireless K800
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system, Logitech BRIO 4K Pro webcam, HP Color LaserJet Pro MFP M477fdn, APC SMART-UPS RT 1000 XL - SURT1000XLI, Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
When I boot into safe mode, I can log in to my account, but when not in safe mood, it gives me the error message at the top? How should I proceed with these methods? Do I still need to log in to the built-in admin?
 

My Computer

Hello Acreed, and welcome to Vista Forums.

As long as you are able to boot into a administrator account while in Safe Mode, you should be able to follow the steps in the tutorial. If not for some reason, then go ahead and boot into the built-in Administrator account instead to do them.

Hope this helps,
Shawn
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2, 4TB Samsung 990 PRO PRO M.2, 8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Mouse
    Logitech MX Master 3
    Keyboard
    Logitech wireless K800
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system, Logitech BRIO 4K Pro webcam, HP Color LaserJet Pro MFP M477fdn, APC SMART-UPS RT 1000 XL - SURT1000XLI, Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
So I have gone to regedit and when I go to HKEY_LOCAL_MACHINE the S-1-5 thing is not there. In the right panel I only have the default option. What else can I do to fix this problem? I would rather not delete the profile because I have a lot of stuff on it that I would like to keep but I have another admin profile on this computer but it would take a lot of time to transfer everything onto the other admin profile and then back onto the new profile and then delete them from the other admin profile. I have restarted my computer several times and it still won't load my profile.
 

My Computer

Hello Tyler, and weclome to Vista Forums.

You might see if doing a System Restore using a restore point dated before this error may be able to fix it for you.

Hope this helps,
Shawn
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2, 4TB Samsung 990 PRO PRO M.2, 8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Mouse
    Logitech MX Master 3
    Keyboard
    Logitech wireless K800
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system, Logitech BRIO 4K Pro webcam, HP Color LaserJet Pro MFP M477fdn, APC SMART-UPS RT 1000 XL - SURT1000XLI, Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
You can click on the System Restore link in the post above for how. ;)
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2, 4TB Samsung 990 PRO PRO M.2, 8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Mouse
    Logitech MX Master 3
    Keyboard
    Logitech wireless K800
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system, Logitech BRIO 4K Pro webcam, HP Color LaserJet Pro MFP M477fdn, APC SMART-UPS RT 1000 XL - SURT1000XLI, Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
I have this problem but sadly, prior to this issue rearing its ugly head, I lost drive detection after the most recent service pack was installed. Hence (even via BIOS) I have no access to the my drives (HDD, DVD ROM and USB DVD ROM). I applied the fix from microsoft to sort the drive problems out but it didn't work. When I next powered up, I could no longer sign on to any of the 3 accounts. As soon as I try, my system attempts to re-boot and the cycle begins again.

How can I system restore without drive detection? BIOS shows all drives are disabled and I cannot adjust it to enable them. It even shows the HDD as disabled. (??)

O/S is Vista Ultimate 64 bit.
AMD Athlon 64 x2 Dual Core 5600+ Speed: 2.80GHz
Mobo: Asrock, AliveNF7G-HDready nVidia-ASR29103-Y2KC
 

My Computer

Hello Watnstar,

See if resetting the BIOS to the default settings will allow the drives to be detected afterwards, and allow you to boot from the Vista installation DVD to do the System Restore.

Hope this helps,
Shawn
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2, 4TB Samsung 990 PRO PRO M.2, 8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Mouse
    Logitech MX Master 3
    Keyboard
    Logitech wireless K800
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system, Logitech BRIO 4K Pro webcam, HP Color LaserJet Pro MFP M477fdn, APC SMART-UPS RT 1000 XL - SURT1000XLI, Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
Thank you for the help & comments. Sadly setting BIOS to defaults had no affect with regards to CD/DVD drives. I did manage to get back into Vista once I realised my USB ports were not working during boot. I changed the Keyboard from USB to a standard PS/2 and was able to F8 to Safe Mode. No password was necessary to get into the Admin account and I was able to System Restore from there. I also, as a safe guard, edited all the accounts and passwords in addition to setting up a new, spare, Admin account. I then created a new Restore Point.

The drive issue remains, but at least I have access to the O/S. After all my recent Vista negatives, I'm lapping up this major positive! :-)

Now all I need do is investigate the drive issue, fix some USB bugs and figure out why I've also got a dodgy (works sometimes) ethernet adaptor. But that's set to be another post on another thread.
 

My Computer

Waynstar,

I'm happy to hear that it's heading in the right direction so far. You might see if connecting the drives to different ports on the motherboard may help.
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2, 4TB Samsung 990 PRO PRO M.2, 8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Mouse
    Logitech MX Master 3
    Keyboard
    Logitech wireless K800
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system, Logitech BRIO 4K Pro webcam, HP Color LaserJet Pro MFP M477fdn, APC SMART-UPS RT 1000 XL - SURT1000XLI, Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
Hi guys - brilliant resource - thank you! :D

Trying to fix this prob on my girlfriends laptop - remotely ! She's away! So was just going to try to activate the built in Admin for her as a quick fix.

I've been testing your excellent guides out on my (fully ok) system and it all works fine using an admin account. But I can't get into an elevated command prompt as a standard user. I get System Error 5 Access Denied. (I have UAC disabled)

I'll try to take her via Safe Mode :confused: but I reckoned enabling via the command prompt might have been easier for her to do.

Am I being dense here?:o Is an elevated command prompt not available from a standard account when there's a working admin account available? Or maybe my system is not as ok as I thought?

Regards
 
Last edited:

My Computer

System One

  • Manufacturer/Model
    Compaq Presario SR5079UK
    CPU
    Intel Core 2 6420 2.13GHz
    Motherboard
    ASUS P5LP-LE
    Memory
    2 Gb
    Graphics card(s)
    BFG GeForce 9800 GT
    Sound Card
    RealTek High Def Audio onboard
    Monitor(s) Displays
    ViewSonic VA2010wb
    Screen Resolution
    1650 x 1050
    Hard Drives
    samsung HD320KJ
    Case
    Tower
    Cooling
    Standard
    Mouse
    MS Basic Optical
    Keyboard
    Compaq KB-0631
    Internet Speed
    8 Mb (claimed)
Back
Top