help me with this error

[yones]

hello

i have probleem with my MB , i have 3GB RAM " kingston 800Mhz bus speed "

i try to instal 4 GB "2*2" i have blue screen ! , i try to fix it by update my MB , and i look in intel for the update but i have this error when i run the update :







MB Info :

Motherboard Name Intel Pearl Creek DG31PR
BIOS Version PRG3110H.86A.0059.2008.1024.1834
Maximum Memory Amount 4 GB

CPU : Quad core Q6600
G-CARD: XFX G-Force 8600 gt






i know your Q now , about the Ram ? its the same bus "800mhz" and i test each one alon and its work , but its dosnt work together .
i try to install new windows too , i have blue screen when win setup start !

now the first things i want to know how to fix MB BIOS update probleem ?
then if that will not fix my Ram probleem help me to fix it

thanks for reading my probleem .

 

[archie123]

try this...........on bootup press F2 tilll you get to the bios options when in bios press F9 this will set the bios to its factory settings , then press F10 to save to cmos and exit (you press ENTER to confirm and if it asks Y for yes you use your arrow keys to navigate up and down)

if its still the same you may have to slow down your memory see if thats the issue

you will need to go back to bios then to the "default frequency ratio" and set it too "disabled"

then goto "advanced memory configuration" or "advanced chipset configuration" and set your memory to 600mhz (this option may not be there it may say 300mhz as its dual channel so set that 300 x 2 = 600)

if it boots fine at the slower speed yuo can either leave it at that or if you want to run it at 800 you may need to increase the voltage to your ram to increase its stabilty but thats not for me to advise i dont want to screw your mobo (its easy and safe if your carefull but you will have to research that)

heres your bios info

http://download.intel.com/support/motherboards/desktop/sb/biosglossaryalpha_v12.pdf

 

[archie123]

one more thing , post up the the model number or a link to your ram modules and using the instructions i linked you too as a referance tell what voltage is currently being supplied to the memory (itl be under DDR Voltage or memory voltage in the advanced options)

im asking because all mobos default to 1.8v for ddr2 some of the higher end stuff runs at between 2.1 and 2.3v , it can run fine on 1.8 till you try and upgrade it , this MAY also be the issue