Extract Files from Vista Installation DVD

How to Extract Files from the Vista Installation DVD​


information   Information
This will show you how to extract original files from the retail Vista installation DVD. You can then use these extracted files to replace missing or corrupted system files in your current Vista installation.
Note   Note
Normally you will find out that you have corrupted system files that cannot be repaired after your run a sfc /scannow command and look at it's log report.




Here's How:
1. Download and install the same free 32-bit (x86) or 64-bit (x64) 7-Zip program version as your 32-bit or 64-bit Vista.​
​
2. Use Compatibiliy Mode on the 7-Zip shortcut and check the Run this program as an administrator box.​
​
3. Run 7-Zip, then click on Tools and Options. Next, click on the Select all button and on OK. (See screenshot below)​
Step1.jpg​
​

4. Insert your retail Vista installation disc into the DVD drive and wait for it to be recognized.​
​
5. In 7-Zip, navigate to your DVD drive letter (ex: E: ) that has the Vista installation disc in it, and double click on the Sources folder. (See screenshot below)​
Step2.jpg​
​

6. Scroll down and double click on the install.wim file. (See screenshot below)​
Step3.jpg​
​

7. You will now see this for a few seconds as it opens. (See screenshot below)​
Step4.jpg​
​

8. Each numbered folder is a different edition of Vista. They will vary depending on what type of Vista installation DVD you have. To see what edition is for each numbered folder, select the 1.xml file and click on the Extract button on the toolbar. (See screenshots below)​
Step5.jpgStep6.jpg​
​

9. Copy the 1.xml file to your desktop. (See screenshot below)​
​
​
Step7.jpg​
​

10. Open the 1.xml file on the desktop. Look for the IMAGE INDEX # and the Name under it in the code (highlighted in red below) to see what Vista edition is for each numbered folder in step 8. (See code box below with an example 1.xml file)​
NOTE: This file will open in Internet Explorer by default.​
Code: 
[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <WIM>[/INDENT]
[INDENT]  <TOTALBYTES>2412491164</TOTALBYTES>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"][B][COLOR=red]-[/COLOR][/B][/URL][B][COLOR=red] <IMAGE INDEX="1">[/COLOR][/B][/INDENT]
[INDENT][B][COLOR=red]<NAME>Windows Vista BUSINESS</NAME>[/COLOR][/B][/INDENT]
[INDENT]  <DESCRIPTION>Windows Vista Business</DESCRIPTION>[/INDENT]
[INDENT]  <FLAGS>BUSINESS</FLAGS>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <WINDOWS>[/INDENT]
[INDENT]  <ARCH>0</ARCH>[/INDENT]
[INDENT]  <PRODUCTNAME>Microsoft® Windows® Operating System</PRODUCTNAME>[/INDENT]
[INDENT]  <HAL>acpiapic</HAL>[/INDENT]
[INDENT]  <PRODUCTTYPE>WinNT</PRODUCTTYPE>[/INDENT]
[INDENT]  <PRODUCTSUITE>Terminal Server</PRODUCTSUITE>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <LANGUAGES>[/INDENT]
[INDENT]  <LANGUAGE>en-US</LANGUAGE>[/INDENT]
[INDENT]  <DEFAULT>en-US</DEFAULT>[/INDENT]
[INDENT]  </LANGUAGES>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <VERSION>[/INDENT]
[INDENT]  <MAJOR>6</MAJOR>[/INDENT]
[INDENT]  <MINOR>0</MINOR>[/INDENT]
[INDENT]  <BUILD>6000</BUILD>[/INDENT]
[INDENT]  <SPBUILD>16386</SPBUILD>[/INDENT]
[INDENT]  </VERSION>[/INDENT]
[INDENT]  <SYSTEMROOT>WINDOWS</SYSTEMROOT>[/INDENT]
[INDENT]  </WINDOWS>[/INDENT]
[INDENT]  <DIRCOUNT>6758</DIRCOUNT>[/INDENT]
[INDENT]  <FILECOUNT>37706</FILECOUNT>[/INDENT]
[INDENT]  <TOTALBYTES>7217370857</TOTALBYTES>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <CREATIONTIME>[/INDENT]
[INDENT]  <HIGHPART>0x01C6FE83</HIGHPART>[/INDENT]
[INDENT]  <LOWPART>0xFACE2238</LOWPART>[/INDENT]
[INDENT]  </CREATIONTIME>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <LASTMODIFICATIONTIME>[/INDENT]
[INDENT]  <HIGHPART>0x01C6FE96</HIGHPART>[/INDENT]
[INDENT]  <LOWPART>0x96045D5F</LOWPART>[/INDENT]
[INDENT]  </LASTMODIFICATIONTIME>[/INDENT]
[INDENT]  </IMAGE>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"][B][COLOR=red]-[/COLOR][/B][/URL][B][COLOR=red] <IMAGE INDEX="2">[/COLOR][/B][/INDENT]
[INDENT][B][COLOR=red]<NAME>Windows Vista HOMEBASIC</NAME> [/COLOR][/B][/INDENT]
[INDENT]  <DESCRIPTION>Windows Vista HomeBasic</DESCRIPTION>[/INDENT]
[INDENT]  <FLAGS>HOMEBASIC</FLAGS>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <WINDOWS>[/INDENT]
[INDENT]  <ARCH>0</ARCH>[/INDENT]
[INDENT]  <PRODUCTNAME>Microsoft® Windows® Operating System</PRODUCTNAME>[/INDENT]
[INDENT]  <HAL>acpiapic</HAL>[/INDENT]
[INDENT]  <PRODUCTTYPE>WinNT</PRODUCTTYPE>[/INDENT]
[INDENT]  <PRODUCTSUITE>Terminal Server</PRODUCTSUITE>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <LANGUAGES>[/INDENT]
[INDENT]  <LANGUAGE>en-US</LANGUAGE>[/INDENT]
[INDENT]  <DEFAULT>en-US</DEFAULT>[/INDENT]
[INDENT]  </LANGUAGES>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <VERSION>[/INDENT]
[INDENT]  <MAJOR>6</MAJOR>[/INDENT]
[INDENT]  <MINOR>0</MINOR>[/INDENT]
[INDENT]  <BUILD>6000</BUILD>[/INDENT]
[INDENT]  <SPBUILD>16386</SPBUILD>[/INDENT]
[INDENT]  </VERSION>[/INDENT]
[INDENT]  <SYSTEMROOT>WINDOWS</SYSTEMROOT>[/INDENT]
[INDENT]  </WINDOWS>[/INDENT]
[INDENT]  <DIRCOUNT>6332</DIRCOUNT>[/INDENT]
[INDENT]  <FILECOUNT>35607</FILECOUNT>[/INDENT]
[INDENT]  <TOTALBYTES>6716880747</TOTALBYTES>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <CREATIONTIME>[/INDENT]
[INDENT]  <HIGHPART>0x01C6FE83</HIGHPART>[/INDENT]
[INDENT]  <LOWPART>0x92D51928</LOWPART>[/INDENT]
[INDENT]  </CREATIONTIME>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <LASTMODIFICATIONTIME>[/INDENT]
[INDENT]  <HIGHPART>0x01C6FE97</HIGHPART>[/INDENT]
[INDENT]  <LOWPART>0x395C54EA</LOWPART>[/INDENT]
[INDENT]  </LASTMODIFICATIONTIME>[/INDENT]
[INDENT]  </IMAGE>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"][B][COLOR=red]-[/COLOR][/B][/URL][B][COLOR=red] <IMAGE INDEX="3">[/COLOR][/B][/INDENT]
[INDENT][B][COLOR=red]<NAME>Windows Vista HOMEPREMIUM</NAME>[/COLOR][/B][/INDENT]
[INDENT]  <DESCRIPTION>Windows Vista HomePremium</DESCRIPTION>[/INDENT]
[INDENT]  <FLAGS>HOMEPREMIUM</FLAGS>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <WINDOWS>[/INDENT]
[INDENT]  <ARCH>0</ARCH>[/INDENT]
[INDENT]  <PRODUCTNAME>Microsoft® Windows® Operating System</PRODUCTNAME>[/INDENT]
[INDENT]  <HAL>acpiapic</HAL>[/INDENT]
[INDENT]  <PRODUCTTYPE>WinNT</PRODUCTTYPE>[/INDENT]
[INDENT]  <PRODUCTSUITE>Terminal Server</PRODUCTSUITE>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <LANGUAGES>[/INDENT]
[INDENT]  <LANGUAGE>en-US</LANGUAGE>[/INDENT]
[INDENT]  <DEFAULT>en-US</DEFAULT>[/INDENT]
[INDENT]  </LANGUAGES>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <VERSION>[/INDENT]
[INDENT]  <MAJOR>6</MAJOR>[/INDENT]
[INDENT]  <MINOR>0</MINOR>[/INDENT]
[INDENT]  <BUILD>6000</BUILD>[/INDENT]
[INDENT]  <SPBUILD>16386</SPBUILD>[/INDENT]
[INDENT]  </VERSION>[/INDENT]
[INDENT]  <SYSTEMROOT>WINDOWS</SYSTEMROOT>[/INDENT]
[INDENT]  </WINDOWS>[/INDENT]
[INDENT]  <DIRCOUNT>6836</DIRCOUNT>[/INDENT]
[INDENT]  <FILECOUNT>37980</FILECOUNT>[/INDENT]
[INDENT]  <TOTALBYTES>8083406637</TOTALBYTES>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <CREATIONTIME>[/INDENT]
[INDENT]  <HIGHPART>0x01C6FE84</HIGHPART>[/INDENT]
[INDENT]  <LOWPART>0x7D5966D0</LOWPART>[/INDENT]
[INDENT]  </CREATIONTIME>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <LASTMODIFICATIONTIME>[/INDENT]
[INDENT]  <HIGHPART>0x01C6FE98</HIGHPART>[/INDENT]
[INDENT]  <LOWPART>0x0B9D5D9A</LOWPART>[/INDENT]
[INDENT]  </LASTMODIFICATIONTIME>[/INDENT]
[INDENT]  </IMAGE>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"][B][COLOR=red]-[/COLOR][/B][/URL][B][COLOR=red] <IMAGE INDEX="4">[/COLOR][/B][/INDENT]
[INDENT][B][COLOR=red]<NAME>Windows Vista ULTIMATE</NAME> [/COLOR][/B][/INDENT]
[INDENT]  <DESCRIPTION>Windows Vista Ultimate</DESCRIPTION>[/INDENT]
[INDENT]  <FLAGS>ULTIMATE</FLAGS>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <WINDOWS>[/INDENT]
[INDENT]  <ARCH>0</ARCH>[/INDENT]
[INDENT]  <PRODUCTNAME>Microsoft® Windows® Operating System</PRODUCTNAME>[/INDENT]
[INDENT]  <HAL>acpiapic</HAL>[/INDENT]
[INDENT]  <PRODUCTTYPE>WinNT</PRODUCTTYPE>[/INDENT]
[INDENT]  <PRODUCTSUITE>Terminal Server</PRODUCTSUITE>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <LANGUAGES>[/INDENT]
[INDENT]  <LANGUAGE>en-US</LANGUAGE>[/INDENT]
[INDENT]  <DEFAULT>en-US</DEFAULT>[/INDENT]
[INDENT]  </LANGUAGES>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <VERSION>[/INDENT]
[INDENT]  <MAJOR>6</MAJOR>[/INDENT]
[INDENT]  <MINOR>0</MINOR>[/INDENT]
[INDENT]  <BUILD>6000</BUILD>[/INDENT]
[INDENT]  <SPBUILD>16386</SPBUILD>[/INDENT]
[INDENT]  </VERSION>[/INDENT]
[INDENT]  <SYSTEMROOT>WINDOWS</SYSTEMROOT>[/INDENT]
[INDENT]  </WINDOWS>[/INDENT]
[INDENT]  <DIRCOUNT>7232</DIRCOUNT>[/INDENT]
[INDENT]  <FILECOUNT>39594</FILECOUNT>[/INDENT]
[INDENT]  <TOTALBYTES>8170796235</TOTALBYTES>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <CREATIONTIME>[/INDENT]
[INDENT]  <HIGHPART>0x01C6FE84</HIGHPART>[/INDENT]
[INDENT]  <LOWPART>0x9AC07836</LOWPART>[/INDENT]
[INDENT]  </CREATIONTIME>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <LASTMODIFICATIONTIME>[/INDENT]
[INDENT]  <HIGHPART>0x01C6FE98</HIGHPART>[/INDENT]
[INDENT]  <LOWPART>0xEA8B4173</LOWPART>[/INDENT]
[INDENT]  </LASTMODIFICATIONTIME>[/INDENT]
[INDENT]  </IMAGE>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"][B][COLOR=red]-[/COLOR][/B][/URL][B][COLOR=red] <IMAGE INDEX="5">[/COLOR][/B][/INDENT]
[INDENT][B][COLOR=red]<NAME>Windows Vista HOMEBASICN</NAME>[/COLOR][/B][/INDENT]
[INDENT]  <DESCRIPTION>Windows Vista HomeBasicN</DESCRIPTION>[/INDENT]
[INDENT]  <FLAGS>HOMEBASICN</FLAGS>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <WINDOWS>[/INDENT]
[INDENT]  <ARCH>0</ARCH>[/INDENT]
[INDENT]  <PRODUCTNAME>Microsoft® Windows® Operating System</PRODUCTNAME>[/INDENT]
[INDENT]  <HAL>acpiapic</HAL>[/INDENT]
[INDENT]  <PRODUCTTYPE>WinNT</PRODUCTTYPE>[/INDENT]
[INDENT]  <PRODUCTSUITE>Terminal Server</PRODUCTSUITE>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <LANGUAGES>[/INDENT]
[INDENT]  <LANGUAGE>en-US</LANGUAGE>[/INDENT]
[INDENT]  <DEFAULT>en-US</DEFAULT>[/INDENT]
[INDENT]  </LANGUAGES>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <VERSION>[/INDENT]
[INDENT]  <MAJOR>6</MAJOR>[/INDENT]
[INDENT]  <MINOR>0</MINOR>[/INDENT]
[INDENT]  <BUILD>6000</BUILD>[/INDENT]
[INDENT]  <SPBUILD>16386</SPBUILD>[/INDENT]
[INDENT]  </VERSION>[/INDENT]
[INDENT]  <SYSTEMROOT>WINDOWS</SYSTEMROOT>[/INDENT]
[INDENT]  </WINDOWS>[/INDENT]
[INDENT]  <DIRCOUNT>6181</DIRCOUNT>[/INDENT]
[INDENT]  <FILECOUNT>34836</FILECOUNT>[/INDENT]
[INDENT]  <TOTALBYTES>6258860686</TOTALBYTES>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <CREATIONTIME>[/INDENT]
[INDENT]  <HIGHPART>0x01C6FE83</HIGHPART>[/INDENT]
[INDENT]  <LOWPART>0x4D63255F</LOWPART>[/INDENT]
[INDENT]  </CREATIONTIME>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <LASTMODIFICATIONTIME>[/INDENT]
[INDENT]  <HIGHPART>0x01C6FE99</HIGHPART>[/INDENT]
[INDENT]  <LOWPART>0x86FA2B08</LOWPART>[/INDENT]
[INDENT]  </LASTMODIFICATIONTIME>[/INDENT]
[INDENT]  </IMAGE>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"][B][COLOR=red]-[/COLOR][/B][/URL][B][COLOR=red] <IMAGE INDEX="6">[/COLOR][/B][/INDENT]
[INDENT][B][COLOR=red]<NAME>Windows Vista BUSINESSN</NAME>[/COLOR][/B][/INDENT]
[INDENT]  <DESCRIPTION>Windows Vista BusinessN</DESCRIPTION>[/INDENT]
[INDENT]  <FLAGS>BUSINESSN</FLAGS>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <WINDOWS>[/INDENT]
[INDENT]  <ARCH>0</ARCH>[/INDENT]
[INDENT]  <PRODUCTNAME>Microsoft® Windows® Operating System</PRODUCTNAME>[/INDENT]
[INDENT]  <HAL>acpiapic</HAL>[/INDENT]
[INDENT]  <PRODUCTTYPE>WinNT</PRODUCTTYPE>[/INDENT]
[INDENT]  <PRODUCTSUITE>Terminal Server</PRODUCTSUITE>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <LANGUAGES>[/INDENT]
[INDENT]  <LANGUAGE>en-US</LANGUAGE>[/INDENT]
[INDENT]  <DEFAULT>en-US</DEFAULT>[/INDENT]
[INDENT]  </LANGUAGES>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <VERSION>[/INDENT]
[INDENT]  <MAJOR>6</MAJOR>[/INDENT]
[INDENT]  <MINOR>0</MINOR>[/INDENT]
[INDENT]  <BUILD>6000</BUILD>[/INDENT]
[INDENT]  <SPBUILD>16386</SPBUILD>[/INDENT]
[INDENT]  </VERSION>[/INDENT]
[INDENT]  <SYSTEMROOT>WINDOWS</SYSTEMROOT>[/INDENT]
[INDENT]  </WINDOWS>[/INDENT]
[INDENT]  <DIRCOUNT>6605</DIRCOUNT>[/INDENT]
[INDENT]  <FILECOUNT>36930</FILECOUNT>[/INDENT]
[INDENT]  <TOTALBYTES>6756321160</TOTALBYTES>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL]</CREATIONTIME>[/INDENT]
[INDENT]  <HIGHPART>0x01C6FE83</HIGHPART>[/INDENT]
[INDENT]  <LOWPART>0xA629EF7C</LOWPART>[/INDENT]
[INDENT]  </CREATIONTIME>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <LASTMODIFICATIONTIME>[/INDENT]
[INDENT]  <HIGHPART>0x01C6FE9A</HIGHPART>[/INDENT]
[INDENT]  <LOWPART>0x69DFB6FB</LOWPART>[/INDENT]
[INDENT]  </LASTMODIFICATIONTIME>[/INDENT]
[INDENT]  </IMAGE>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"][B][COLOR=red]-[/COLOR][/B][/URL][B][COLOR=red] <IMAGE INDEX="7">[/COLOR][/B][/INDENT]
[INDENT][B][COLOR=red]<NAME>Windows Vista STARTER</NAME>[/COLOR][/B][/INDENT]
[INDENT]  <DESCRIPTION>Windows Vista Starter</DESCRIPTION>[/INDENT]
[INDENT]  <FLAGS>STARTER</FLAGS>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <WINDOWS>[/INDENT]
[INDENT]  <ARCH>0</ARCH>[/INDENT]
[INDENT]  <PRODUCTNAME>Microsoft® Windows® Operating System</PRODUCTNAME>[/INDENT]
[INDENT]  <HAL>acpiapic</HAL>[/INDENT]
[INDENT]  <PRODUCTTYPE>WinNT</PRODUCTTYPE>[/INDENT]
[INDENT]  <PRODUCTSUITE>Terminal Server</PRODUCTSUITE>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <LANGUAGES>[/INDENT]
[INDENT]  <LANGUAGE>en-US</LANGUAGE>[/INDENT]
[INDENT]  <DEFAULT>en-US</DEFAULT>[/INDENT]
[INDENT]  </LANGUAGES>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <VERSION>[/INDENT]
[INDENT]  <MAJOR>6</MAJOR>[/INDENT]
[INDENT]  <MINOR>0</MINOR>[/INDENT]
[INDENT]  <BUILD>6000</BUILD>[/INDENT]
[INDENT]  <SPBUILD>16386</SPBUILD>[/INDENT]
[INDENT]  </VERSION>[/INDENT]
[INDENT]  <SYSTEMROOT>WINDOWS</SYSTEMROOT>[/INDENT]
[INDENT]  </WINDOWS>[/INDENT]
[INDENT]  <DIRCOUNT>6264</DIRCOUNT>[/INDENT]
[INDENT]  <FILECOUNT>35129</FILECOUNT>[/INDENT]
[INDENT]  <TOTALBYTES>6640749307</TOTALBYTES>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <CREATIONTIME>[/INDENT]
[INDENT]  <HIGHPART>0x01C6FE87</HIGHPART>[/INDENT]
[INDENT]  <LOWPART>0xA27366AF</LOWPART>[/INDENT]
[INDENT]  </CREATIONTIME>[/INDENT]
[INDENT][URL="file:///C:/Users/User-Name/Desktop/1.xml#"]-[/URL] <LASTMODIFICATIONTIME>[/INDENT]
[INDENT]  <HIGHPART>0x01C6FE9B</HIGHPART>[/INDENT]
[INDENT]  <LOWPART>0xA7338EAC</LOWPART>[/INDENT]
[INDENT]  </LASTMODIFICATIONTIME>[/INDENT]
[INDENT]  </IMAGE>[/INDENT]
[INDENT]  </WIM>[/INDENT]
[INDENT]
​

11. Now open the numbered folder that is the same edition as your currently installed Vista edition, and navigate to the Windows\System32 folder. You can now select and extract the system files that you need to your desktop to use to copy and replace your missing or corrupted system files in your currently installed Vista. (See screenshot below)​
NOTE: You may need to take ownership and "Allow" your account "Full Control" of the file in your current installation before you will be allowed to replace it with the extacted copy.​
Step8.jpg​
​

That's it,
Shawn



Related Tutorials

 

Attachments

  • thumb_vista_install_logo.jpg
    thumb_vista_install_logo.jpg
    2.7 KB · Views: 365
Last edited by a moderator:
Click to expand...
Thanks, just store it away in my head for later.
 

My Computer

System One

  • Manufacturer/Model
    Lenovo Thinkpad T400
    CPU
    Intel Mobile Core 2 Duo P8700 @ 2.53GHz
    Motherboard
    LENOVO 64734VM
    Memory
    2.00GB Single-Channel DDR3 @ 531MHz
    Graphics Card(s)
    Intel Mobile Intel 4 Series Express Chipset Family
    Sound Card
    Conexant 20561 SmartAudio HD
    Monitor(s) Displays
    15 inch
    Screen Resolution
    1280 x 800
    Hard Drives
    1x 180GB Intel 530 series SSD
    1 x 120GB Hitachi 5400rmp
    1 x 650GB Western Digital Elements 5400rpm
    1x 1Tb Western Digital Elements 5400rpm
    Internet Speed
    Medium for New Zealand
    Other Info
    Weakest part of my computer is the graphics chipset.
    Only ever used a laptop.
    Also use USB Freeview TV Card
    Lenovo Docking Station
    External Speakers
    Other bits a pieces as needed
You're welcome mate. :)
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics Card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2,
    4TB Samsung 990 PRO PRO M.2,
    8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Keyboard
    Logitech wireless K800
    Mouse
    Logitech MX Master 3
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system,
    Logitech BRIO 4K Pro webcam,
    HP Color LaserJet Pro MFP M477fdn,
    APC SMART-UPS RT 1000 XL - SURT1000XLI,
    Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Graphics card(s)
    NVIDIA GeForce 940MX
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
PLEASE HELP ME!
i ran a sfc and it came up that i had corrupt files it couldnt fix, so i tried the start up repair and said it found nothing, so i wanted to extract the files from my rein cd.
im also having these issues, and i followed all of your steps and get to number 8 of using 7 zip to extract and i dont see a 1xml file, they are all word files like $recycle bin,perf logs,program files, user, docs, windows, autoexec. bat, config sys etc, no numbers. and im using the reinstallation dvd that dell gave me with my comp.

oh and corrupt files were tcpmon,ini and settings.ini
thanks

and the back sleeve of my reinstall cd from dell says made in canada, does that matter?
 

My Computer

System One

  • Manufacturer/Model
    del inspiron 530s
    CPU
    del inspiron 530s
jmil709 said:
PLEASE HELP ME!
i ran a sfc and it came up that i had corrupt files it couldnt fix, so i tried the start up repair and said it found nothing, so i wanted to extract the files from my rein cd.
im also having these issues, and i followed all of your steps and get to number 8 of using 7 zip to extract and i dont see a 1xml file, they are all word files like $recycle bin,perf logs,program files, user, docs, windows, autoexec. bat, config sys etc, no numbers. and im using the reinstallation dvd that dell gave me with my comp.
Click to expand...

Are you double clicking on the install.wim?

I get 7 folders and 1xml when I do.

I found tcpmon.ini but no "settings.ini"


jmil709 said:
oh and corrupt files were tcpmon,ini and settings.ini
thanks
Click to expand...

Do you have home basic or home premium?
 

My Computer

System One

  • Manufacturer/Model
    Self Built
    CPU
    Intel I5-2500K @3.3GHz
    Motherboard
    Asrock P67 Extreme4
    Memory
    16GB G.Skill Ripjaws X (4x4GB)
    Graphics Card(s)
    EVGA GeForce 750 Ti SC 2GB
    Sound Card
    ASUS Xonar DG 5.1 Channels 24-bit 96KHz PCI Interface Sound
    Monitor(s) Displays
    auria eq2367
    Screen Resolution
    1920 x 1080
    Hard Drives
    250GB Samsung 850 EVO SSD
    1TB WD Blue
    1TB Hitachi
    PSU
    SeaSonic X 650W 80 Plus Gold
    Case
    Corsair Obsidian 750D
    Cooling
    Corsair H60, Three 140mm case fans
    Keyboard
    Logitech Wireless Keyboard K520
    Mouse
    Logitech Wireless Mouse M310
    Internet Speed
    Wave Broadband ~ 100 down 5 Up
    Other Info
    Laptop specs: HP g7-1365dx /
    CPU: AMD A6-3420M APU with Radeon(tm) HD Graphics /
    RAM: Crucial 8Gb (2x4Gb) /
    SSD: Crucial M4-CT128M4SSD2 ATA Device/ FW 000F /
    GFX: AMD Radeon HD 6520G /
    OS: Windows 10 Pro x64
Hello Jmil, and welcome to Seven Forums.

Unfortunately, you may not be able to extract the files from a OEM factory restore disc. It usually needs to be from a retail disc instead.

Could you do the steps in the yellow TIP box at the top of the tutorial below and post your sfcdetails.txt file. This will tell us exactly which files and their locations that are bad and need replacing. A bad file may need replacing in more than one location, so it's important to see and make sure if so. Afterwards, I'll upload a clean copy of the system files that needs to be replace for you.

http://www.vistax64.com/tutorials/66978-system-files-sfc-command.html
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics Card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2,
    4TB Samsung 990 PRO PRO M.2,
    8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Keyboard
    Logitech wireless K800
    Mouse
    Logitech MX Master 3
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system,
    Logitech BRIO 4K Pro webcam,
    HP Color LaserJet Pro MFP M477fdn,
    APC SMART-UPS RT 1000 XL - SURT1000XLI,
    Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Graphics card(s)
    NVIDIA GeForce 940MX
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
Hi jmilo,

I think you will find you do not have an 1xml file - you don't need it because there is only one edititon in your dvd.

If you look in the sources\install.wim - then in windows\system32 - you may find the files you are looking for there.
 

My Computers

System One System Two

  • Operating System
    Vista
    CPU
    Intel E8400
    Motherboard
    ASRock1333-GLAN R2.0
    Memory
    4gb DDR2 800
    Graphics Card(s)
    nvidia 9500GT 1gb
  • Operating System
    win7/vista
    CPU
    intel i5-8400
    Motherboard
    gigabyte b365m ds3h
    Memory
    ballistix 2x8gb 3200
Hi,

Yesterday my windows stopped uploading in normal form. I started it in safe mode. I used SFC to do repairs. 2 files could not be repaired: tcpmon.ini (C:\Wndows\System32\tcpmon.ini), and Settings.ini (C:\Users\Administrator\AppData\Local\Microsoft\Windows Sidebar\Settings.ini). I tried replacing them using 7-zip file manager and the Windows Vista Reinstallation DVD that I had. After going through all that taking ownership and full control stuff, I finally stopped getting the "you are not authorized" and error messages. I interpreted this as that I had replaced them with the original files.

After that I made a SFC search again. Still, I got that the two files were faulty. Assuming that I had to reboot the computer to make the changes in place, i restarted the computer into normal mode. The windows did not load again.

Now I am back in safe mood. What can I do now?
 

My Computer

System One

My Computer

System One

  • Manufacturer/Model
    Custom
    CPU
    AMD FX-4100
    Motherboard
    Gigabyte
    Memory
    4Gb
    Graphics Card(s)
    ATI 5450
    Screen Resolution
    1600*900
    Internet Speed
    10Mbps
DAA said:
Hi,

Yesterday my windows stopped uploading in normal form. I started it in safe mode. I used SFC to do repairs. 2 files could not be repaired: tcpmon.ini (C:\Wndows\System32\tcpmon.ini), and Settings.ini (C:\Users\Administrator\AppData\Local\Microsoft\Windows Sidebar\Settings.ini). I tried replacing them using 7-zip file manager and the Windows Vista Reinstallation DVD that I had. After going through all that taking ownership and full control stuff, I finally stopped getting the "you are not authorized" and error messages. I interpreted this as that I had replaced them with the original files.

After that I made a SFC search again. Still, I got that the two files were faulty. Assuming that I had to reboot the computer to make the changes in place, i restarted the computer into normal mode. The windows did not load again.

Now I am back in safe mood. What can I do now?
Click to expand...

Hello DAA, and welcome to Vista Forums.

In addition, you might also see if doing a SFC scan at boot instead may work better for you since the system would not be in use at the time.

SFC /SCANNOW : Run in Command Prompt at Boot - Windows 7 Forums

Hope this helps, :)
Shawn
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics Card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2,
    4TB Samsung 990 PRO PRO M.2,
    8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Keyboard
    Logitech wireless K800
    Mouse
    Logitech MX Master 3
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system,
    Logitech BRIO 4K Pro webcam,
    HP Color LaserJet Pro MFP M477fdn,
    APC SMART-UPS RT 1000 XL - SURT1000XLI,
    Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Graphics card(s)
    NVIDIA GeForce 940MX
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
I've followed all the instructions for extracting the files that SFC can't fix but I'm stuck at what to do with them. I have three files that SFC can't fix; vbscript.dll, winspool.drv.mui, and RSWOP.icm.

I found the information here that tells me how to extract the missing files from the installation disk. So now, I can find vbscript.dll in the Windows\System32 folder of the install disk. Winspool.drv.mui is not there. Using a little detective work, I can find it in another sub-folder of the disk, but now I don't remember where. I think it was in the en-US subfolder of System32. RSWOP.icm is not on the install disk. The instructions end at how to find them but don't say where to put them or how to put them there. I copied vbscript.dll to the C:\Windows\System32 folder and replaced the file there. Now my vbscript issues appear to be solved, but SFC still says the files are corrupt. All the files say "hash mismatch" and "source file in store is also corrupted". I did find a RSWOP.icm download from Microsoft that I installed, but SFC still says it can't fix that file. If I search my hard disk for the locations of the corrupted files, vbscript is located in more than 20 places.

Questions:

  1. When I find the file on the install disk to repair the files on the hard drive, where should I be putting these files? How do I know which path to follow?
  2. Where is the system store?
  3. Should I copy them to the appropriate directory or use 7-Zip to extract them to the directory?
  4. How am I going to fix RSWOP.icm if it's not on the installation disk?
Here is the latest list from the CBS.log edited to show the relevant lines:
Code: 
2012-10-27 18:03:27, Info                  CSI    00000185 [SR] Cannot repair member file [l:32{16}]"winspool.drv.mui" of Microsoft-Windows-Printing-Spooler-Client.Resources, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2012-10-27 18:03:35, Info                  CSI    00000187 [SR] Cannot repair member file [l:32{16}]"winspool.drv.mui" of Microsoft-Windows-Printing-Spooler-Client.Resources, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2012-10-27 18:03:35, Info                  CSI    00000188 [SR] This component was referenced by [l:164{82}]"Package_44_for_KB936330~31bf3856ad364e35~x86~en-US~6.0.1.18000.936330-60_en-us_GDR"
2012-10-27 18:03:35, Info                  CSI    0000018b [SR] Could not reproject corrupted file [ml:520{260},l:58{29}]"\??\C:\WINDOWS\System32\en-US"\[l:32{16}]"winspool.drv.mui"; source file in store is also corrupted
2012-10-27 18:04:23, Info                  CSI    000001a6 [SR] Cannot repair member file [l:24{12}]"vbscript.dll" of Microsoft-Windows-Scripting-VBScript, Version = 9.1.8112.16450, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2012-10-27 18:04:32, Info                  CSI    000001a8 [SR] Cannot repair member file [l:24{12}]"vbscript.dll" of Microsoft-Windows-Scripting-VBScript, Version = 9.1.8112.16450, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2012-10-27 18:04:32, Info                  CSI    000001a9 [SR] This component was referenced by [l:150{75}]"Package_1_for_KB2744842~31bf3856ad364e35~x86~~9.1.1.0.2744842-2_neutral_GDR"
2012-10-27 18:04:32, Info                  CSI    000001ac [SR] Could not reproject corrupted file [ml:520{260},l:46{23}]"\??\C:\WINDOWS\System32"\[l:24{12}]"vbscript.dll"; source file in store is also corrupted
2012-10-27 18:05:35, Info                  CSI    000001d2 [SR] Cannot repair member file [l:18{9}]"RSWOP.icm" of Microsoft-Windows-WindowsCodecExt, Version = 7.0.6002.18107, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2012-10-27 18:05:39, Info                  CSI    000001d4 [SR] Cannot repair member file [l:18{9}]"RSWOP.icm" of Microsoft-Windows-WindowsCodecExt, Version = 7.0.6002.18107, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2012-10-27 18:05:39, Info                  CSI    000001d5 [SR] This component was referenced by [l:160{80}]"Microsoft-Windows-DGT-Package~31bf3856ad364e35~x86~~7.0.6002.18107.WindowsCodecs"
2012-10-27 18:05:39, Info                  CSI    000001d8 [SR] Could not reproject corrupted file [ml:520{260},l:86{43}]"\??\C:\WINDOWS\System32\spool\drivers\color"\[l:18{9}]"RSWOP.icm"; source file in store is also corrupted
2012-10-27 18:07:24, Info                  CSI    00000213 [SR] Cannot repair member file [l:32{16}]"winspool.drv.mui" of Microsoft-Windows-Printing-Spooler-Client.Resources, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2012-10-27 18:07:24, Info                  CSI    00000215 [SR] Cannot repair member file [l:24{12}]"vbscript.dll" of Microsoft-Windows-Scripting-VBScript, Version = 9.1.8112.16450, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2012-10-27 18:07:24, Info                  CSI    00000217 [SR] Cannot repair member file [l:18{9}]"RSWOP.icm" of Microsoft-Windows-WindowsCodecExt, Version = 7.0.6002.18107, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2012-10-27 18:07:24, Info                  CSI    00000219 [SR] Cannot repair member file [l:24{12}]"vbscript.dll" of Microsoft-Windows-Scripting-VBScript, Version = 9.1.8112.16450, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2012-10-27 18:07:24, Info                  CSI    0000021a [SR] This component was referenced by [l:150{75}]"Package_1_for_KB2744842~31bf3856ad364e35~x86~~9.1.1.0.2744842-2_neutral_GDR"
2012-10-27 18:07:25, Info                  CSI    0000021d [SR] Could not reproject corrupted file [ml:520{260},l:46{23}]"\??\C:\WINDOWS\System32"\[l:24{12}]"vbscript.dll"; source file in store is also corrupted
2012-10-27 18:07:25, Info                  CSI    0000021f [SR] Cannot repair member file [l:32{16}]"winspool.drv.mui" of Microsoft-Windows-Printing-Spooler-Client.Resources, Version = 6.0.6001.18000, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture = [l:10{5}]"en-US", VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2012-10-27 18:07:25, Info                  CSI    00000220 [SR] This component was referenced by [l:164{82}]"Package_44_for_KB936330~31bf3856ad364e35~x86~en-US~6.0.1.18000.936330-60_en-us_GDR"
2012-10-27 18:07:25, Info                  CSI    00000223 [SR] Could not reproject corrupted file [ml:520{260},l:58{29}]"\??\C:\WINDOWS\System32\en-US"\[l:32{16}]"winspool.drv.mui"; source file in store is also corrupted
2012-10-27 18:07:25, Info                  CSI    00000225 [SR] Cannot repair member file [l:18{9}]"RSWOP.icm" of Microsoft-Windows-WindowsCodecExt, Version = 7.0.6002.18107, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch
2012-10-27 18:07:25, Info                  CSI    00000226 [SR] This component was referenced by [l:160{80}]"Microsoft-Windows-DGT-Package~31bf3856ad364e35~x86~~7.0.6002.18107.WindowsCodecs"
2012-10-27 18:07:25, Info                  CSI    00000229 [SR] Could not reproject corrupted file [ml:520{260},l:86{43}]"\??\C:\WINDOWS\System32\spool\drivers\color"\[l:18{9}]"RSWOP.icm"; source file in store is also corrupted
I hope this is useful. BTW, I'm running Vista Home Premium 32-bit. Any help would be appreciated. This is a disk that got corrupted when the circuit board wigged out. The board has been replaced. I'm going to make an image of my partitions to transfer to a new drive but I'd like to fix Windows first before making the image.

I see a suggestion here to try running SFC on boot, but the last boot erased all the boot data. I'm reluctant to try that again before making an image.
 

My Computer

System One

  • Operating System
    Windows Vista Home Premium SP2, 32-bit
    Manufacturer/Model
    Retrofitted Refurbished Gateway
    CPU
    AMD
    Motherboard
    ASUS M3A78-EM
    Memory
    4 GB
    Monitor(s) Displays
    Acer 22-in Flat Screen Monitor
    Keyboard
    Logitech K350 Wireless Keyboard
    Mouse
    Logitech M705 Wireless Mouse
Hello Andy, and welcome to Vista Forums.

If you like, you could also do a repair install to fix these. I would recommend to backup anything you do not want to lose first just to be safe though.

Hope this helps, :)
Shawn
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics Card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2,
    4TB Samsung 990 PRO PRO M.2,
    8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Keyboard
    Logitech wireless K800
    Mouse
    Logitech MX Master 3
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system,
    Logitech BRIO 4K Pro webcam,
    HP Color LaserJet Pro MFP M477fdn,
    APC SMART-UPS RT 1000 XL - SURT1000XLI,
    Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Graphics card(s)
    NVIDIA GeForce 940MX
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
Thank you, but a repair install is not really an option for me. I have thousands of emails and restoring them back into Windows Mail took days last time I lost them. For 3 files, a repair install would cause much more work after it's done. The odd thing is that winspool.drv.mui was copied into all the locations (3) of the file and SFC still reports that it's bad. Vbscript.dll will be much more difficult if I have to do that since it's located in so many directories. Also, I don't see how a repair install will fix RSWOP.icm if it's nowhere on the disk.

I'm crossing my fingers that someone will have the answers to directly fix just these 3 files so I can move on without adding more tasks.
 

My Computer

System One

  • Operating System
    Windows Vista Home Premium SP2, 32-bit
    Manufacturer/Model
    Retrofitted Refurbished Gateway
    CPU
    AMD
    Motherboard
    ASUS M3A78-EM
    Memory
    4 GB
    Monitor(s) Displays
    Acer 22-in Flat Screen Monitor
    Keyboard
    Logitech K350 Wireless Keyboard
    Mouse
    Logitech M705 Wireless Mouse
I've found entries in the registry that correspond to these files. Is it possible that the files are fine but the registry is reporting them wrong? I've seen fixes where people re-registered particular items to get them working again.
 

My Computer

System One

  • Operating System
    Windows Vista Home Premium SP2, 32-bit
    Manufacturer/Model
    Retrofitted Refurbished Gateway
    CPU
    AMD
    Motherboard
    ASUS M3A78-EM
    Memory
    4 GB
    Monitor(s) Displays
    Acer 22-in Flat Screen Monitor
    Keyboard
    Logitech K350 Wireless Keyboard
    Mouse
    Logitech M705 Wireless Mouse
Hello Andy,

Sorry, but no. The SFC scan doesn't look at the registry. It checks the intregrity of the files themselves.

Re-registering has not affect on a corrupted file being.

Since this is for the print spooler, you might see if reinstalling your printer drivers may be able to help if you are having issues with it. If not, then it's most likely nothing to worry about until you have time to do a repair or clean install if Vista when you like.
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics Card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2,
    4TB Samsung 990 PRO PRO M.2,
    8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Keyboard
    Logitech wireless K800
    Mouse
    Logitech MX Master 3
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system,
    Logitech BRIO 4K Pro webcam,
    HP Color LaserJet Pro MFP M477fdn,
    APC SMART-UPS RT 1000 XL - SURT1000XLI,
    Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Graphics card(s)
    NVIDIA GeForce 940MX
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
It seems that SFC won't fix the files because the source file in store is also corrupted. Shouldn't I just be able to replace the file in the store and then let SFC fix it from there? I don't know where the store is.

Also, I'm not really noticing any problems with vbscript or print spooling, but that doesn't mean there aren't any. Is it possible that there aren't any problems but SFC is just going to continue reporting them as problems no matter what I do? Should I just ignore the messages until I actually see a problem? I am having boot problems and it's continually running a chkdsk at reboot, but I don't see them as spool or script issues.
 

My Computer

System One

  • Operating System
    Windows Vista Home Premium SP2, 32-bit
    Manufacturer/Model
    Retrofitted Refurbished Gateway
    CPU
    AMD
    Motherboard
    ASUS M3A78-EM
    Memory
    4 GB
    Monitor(s) Displays
    Acer 22-in Flat Screen Monitor
    Keyboard
    Logitech K350 Wireless Keyboard
    Mouse
    Logitech M705 Wireless Mouse
Thank you for this, Shawn. I didn't know that 7z can handle WIM files like this. WinRAR is an excellent compression tool, but doesn't know how to deal with WIM files. Good to know about this.

I discovered that I have, mysteriously so, a corrupt "mf.dll" as determined by SFC scannow. I'm perplexed because my installation of Vista Ultimate is rather fresh. Anyway, following the initial OS installation my system went through numerous Microsoft updates, even after applying SP1 and SP2. Who knows, perhaps somewhere along the way the mf.dll got inadvertently replaced with one that isn't totally accepted by the OS.

I went to "dll-files.com" to learn about the file and was offered a replacement... but, I think I'd rather take it directly from my own trusted source disks.
 

My Computer

System One

  • Manufacturer/Model
    HP Pavillion dv5t
    CPU
    Intel Core Duo 2.53GHz
    Memory
    4Gb
    Graphics Card(s)
    NVidia GeForce 9600M GT 512Mb
    Screen Resolution
    1280x800 32bit
    Hard Drives
    Seagate Momentus XT 500Gb
    Hitachi Travelstar HTS543225L9A300 250Gb
    Mouse
    Microsoft 4000
You're welcome Gary. I agree. I prefer not to use unknown sources as well. :)
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics Card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2,
    4TB Samsung 990 PRO PRO M.2,
    8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Keyboard
    Logitech wireless K800
    Mouse
    Logitech MX Master 3
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system,
    Logitech BRIO 4K Pro webcam,
    HP Color LaserJet Pro MFP M477fdn,
    APC SMART-UPS RT 1000 XL - SURT1000XLI,
    Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Graphics card(s)
    NVIDIA GeForce 940MX
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
AndyTampa said:
It seems that SFC won't fix the files because the source file in store is also corrupted. Shouldn't I just be able to replace the file in the store and then let SFC fix it from there? I don't know where the store is.

Also, I'm not really noticing any problems with vbscript or print spooling, but that doesn't mean there aren't any. Is it possible that there aren't any problems but SFC is just going to continue reporting them as problems no matter what I do? Should I just ignore the messages until I actually see a problem? I am having boot problems and it's continually running a chkdsk at reboot, but I don't see them as spool or script issues.
Click to expand...

Sorry for the late reply Andy.

I'd get the chkdsk issue sorted first. If there's corruption on the disk, then that could be the source of how this file got corrupted.
 

My Computers

System One System Two

  • Operating System
    Windows 10 Pro 64-bit
    Manufacturer/Model
    Custom
    CPU
    Intel i7-8700K 5 GHz
    Motherboard
    ASUS ROG Maximus XI Formula Z390
    Memory
    64 GB (4x16GB) G.SKILL TridentZ RGB DDR4 3600 MHz (F4-3600C18D-32GTZR)
    Graphics Card(s)
    ASUS ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Integrated Digital Audio (S/PDIF)
    Monitor(s) Displays
    2 x Samsung Odyssey G7 27"
    Screen Resolution
    2560x1440
    Hard Drives
    1TB Samsung 990 PRO M.2,
    4TB Samsung 990 PRO PRO M.2,
    8TB WD MyCloudEX2Ultra NAS
    PSU
    Seasonic Prime Titanium 850W
    Case
    Thermaltake Core P3
    Cooling
    Corsair Hydro H115i
    Keyboard
    Logitech wireless K800
    Mouse
    Logitech MX Master 3
    Internet Speed
    1 Gb/s Download and 35 Mb/s Upload
    Other Info
    Logitech Z625 speaker system,
    Logitech BRIO 4K Pro webcam,
    HP Color LaserJet Pro MFP M477fdn,
    APC SMART-UPS RT 1000 XL - SURT1000XLI,
    Galaxy S23 Plus phone
  • Operating System
    Windows 10 Pro
    Manufacturer/Model
    HP Envy Y0F94AV
    CPU
    i7-7500U @ 2.70 GHz
    Memory
    16 GB DDR4-2133
    Graphics card(s)
    NVIDIA GeForce 940MX
    Sound Card
    Conexant ISST Audio
    Monitor(s) Displays
    17.3" UHD IPS touch
    Screen Resolution
    3480 x 2160
    Hard Drives
    512 GB M.2 SSD
Well damn all of that coding has left me totally, utterly confused, I feel a headache coming on :sarc: No sex tonight dear :p

However in all seriousness you guys and the knowledge you possess blows my mind.

And while this may not be the perfect place to say it, I would just like to thank you all.
 

My Computer

System One

  • Manufacturer/Model
    Homebuilt
    CPU
    AMD Phenom II x 4 965
    Motherboard
    Gigabyte GA-MA770T-UD3P
    Memory
    4GB DDR3
    Graphics Card(s)
    Nvidia GeForce GTX 750 TI
    Sound Card
    Creative Sound Blaster X-Fi Xtreme Audio
    Monitor(s) Displays
    Phillips 19"
    Screen Resolution
    1280 x 1024
    Hard Drives
    1 x 128GB Samsung 840 Pro SSD
    1 x 1TB Sata
    1 x 160GB IDE
    1 x 2Tb WD External My Book Elite
    1 x 1TB WD External My Book Elite
    1 x 4TB WD External My Book
    PSU
    Thermaltake 850W XT
    Case
    Coolermaster Storm Sniper Black Edition
    Cooling
    AC-ALPINE-64PRO ARTIC COOLING
    Keyboard
    12 year old Compaq, cant see any of the letters anymore :)
    Mouse
    Microflacid Sterile
    Internet Speed
    ADSL2+
    Other Info
    My husband and I divorced over religious differences.. He thought he was God and I didn't.
You must log in or register to reply here.
Back
Top