My system wouldnt come out of standby or re-boot. I switched it from graphics card to on board graphics and then it was working. Ive been having complicated issues with this PC, but thats another story.
my question now is, after getting graphics and re-booting, the BIOS always defaults to this screen on POST.
....warning-system boot fail....
your system last boot fail or POST interrupted. Please enter setup to load defaults and reboot again. Press F1 to continue or DEL to enter setup.
Ok, fine, so i enter setup several times, loaded defaults and rebooted, I even re-flashed the BIOS, yet this screen still comes up during POST and will not boot into windows without me pressing F1.
Anyway to get rid of this annoyance?
my question now is, after getting graphics and re-booting, the BIOS always defaults to this screen on POST.
....warning-system boot fail....
your system last boot fail or POST interrupted. Please enter setup to load defaults and reboot again. Press F1 to continue or DEL to enter setup.
Ok, fine, so i enter setup several times, loaded defaults and rebooted, I even re-flashed the BIOS, yet this screen still comes up during POST and will not boot into windows without me pressing F1.
Anyway to get rid of this annoyance?
My Computer
System One
-
- Manufacturer/Model
- ZT Systems 7308Ma
- CPU
- AMD Phenom™ II X4 920 Quad-Core Processor
- Motherboard
- ASUS M3A78-EM
- Memory
- 6GB DDR2 Memory
- Graphics card(s)
- Integrated ATI Radeon™ HD 3200 GPU
- Sound Card
- Realtek® ALC1200 8 -Channel High Definition Audio CODEC
- Monitor(s) Displays
- HANNS-G 19" and SONY 17"
- Screen Resolution
- 1280 by 1024
- Hard Drives
- WD 750GB SATA SeaGate 200GB SATA Maxtor 80GB IDE
- PSU
- ATX 12V 300W
- Other Info
- Blu-Ray BD/DVDRW Combo Drive SATA TSST corp CD/DVDW Combo Drive
