vista slow search

anon125

Banned
In XP i can select a folder - key inthe file name approx and bang it finds it.
vista has to have that slow thing along the top.
the green slime of death slowly creeps along the top of the screen while Vista finds the file - maybe.
any ideas?
thanks
 

My Computer

My Computer

System One

  • CPU
    T7600G Core2Duo 2.66 Ghz
    Motherboard
    Intel 945PM + ICH7 Chipset
    Memory
    4GB DDR2 PC2-5300 667MHz
    Graphics card(s)
    Mobility Radeon x1900 256MB
    Sound Card
    Realtek HD
    Monitor(s) Displays
    WUXGA 17"
    Screen Resolution
    1920X1200
    Hard Drives
    640GB 7200RPM SATA/RAID 0 (2x320GB) and 320GB 7200RPM External
    Mouse
    Wireless Microsoft 3000
    Internet Speed
    10 mbps/2 mbps
    Other Info
    Optical Drive: Panasonic UJ-220 DL BD-RE (Blu-Ray)
In XP i can select a folder - key inthe file name approx and bang it finds it.
vista has to have that slow thing along the top.
the green slime of death slowly creeps along the top of the screen while Vista finds the file - maybe.
any ideas?
thanks

Here's a few suggestions that will, at least, speed up the search process for you:
1. First, in general, before you even start searching, check your Indexed Locations list to be sure it reflects what locations you want to have included in any Indexed Search. Delete any location(s) that you don't think you'll need for the majority of your searches, and add whatever locations you think will enhance the majority of your searches.)
2. When you're ready to search, utilize Advanced Search rather than just Search, and set your search options to match what you are searching for. (i.e. date, location, etc., and don't forget to check whether it's a doc, photo, email, music, or other.)
3. Write the name of the item you're searching for in the top right-hand search pane, not in the search pane that says "Name." The top one starts the search immediately, when you type the 1st letter of the first word -- much like the search pane in the Start Menu (also a good place to conduct a search --- if you want to utilize only your default search options and have only the Index Locations searched).
 

My Computer

System One

  • Manufacturer/Model
    HP Pavillion dv5t (Gen. 1)
    CPU
    Intel(R) Core(TM)2 Duo Processor T9400 (2.53 GHz)
    Memory
    4GB DDR2 System Memory (2 Dimm)
    Graphics card(s)
    512 MB NVIDIA GeForce 9600M GT
    Monitor(s) Displays
    15.4" diagonal WSXGA+ High-Definition HP BrightView Widescreen Display
    Screen Resolution
    1680 x 1050
    Hard Drives
    320GB 5400RPM SATA Hard Drive with HP ProtectSmart Hard Drive Protection
    Mouse
    built in - Synaptics TouchPad V6.5 on PS/2 Port
    Keyboard
    built in - HP
    Internet Speed
    max
    Other Info
    ~ Intel Next-Gen Wireless-N Mini-card w/Bluetooth ~ Blu-Ray ROM DVD+/-R/RW ~ Integ. HDTV Hybrid Tuner ~ 12 Cell Battery ~ MS Office (Home Premium) 2007 ~
In XP i can select a folder - key inthe file name approx and bang it finds it.
vista has to have that slow thing along the top.
the green slime of death slowly creeps along the top of the screen while Vista finds the file - maybe.
any ideas?
thanks

Here's a few suggestions that will, at least, speed up the search process for you:
1. First, in general, before you even start searching, check your Indexed Locations list to be sure it reflects what locations you want to have included in any Indexed Search. Delete any location(s) that you don't think you'll need for the majority of your searches, and add whatever locations you think will enhance the majority of your searches.)
2. When you're ready to search, utilize Advanced Search rather than just Search, and set your search options to match what you are searching for. (i.e. date, location, etc., and don't forget to check whether it's a doc, photo, email, music, or other.)
3. Write the name of the item you're searching for in the top right-hand search pane, not in the search pane that says "Name." The top one starts the search immediately, when you type the 1st letter of the first word -- much like the search pane in the Start Menu (also a good place to conduct a search --- if you want to utilize only your default search options and have only the Index Locations searched).

thanks

the difficulty i have with this is that the search pane you mention is not there!
if i just type vzsdfsd then it sometimes comes up with the advanced search.
how do i make it so the advanced search is ALWAYS there?
i have no idea where the indexed areas are .
 

My Computer

the difficulty i have with this is that the search pane you mention is not there!
if i just type vzsdfsd then it sometimes comes up with the advanced search. how do i make it so the advanced search is ALWAYS there? i have no idea where the indexed areas are .

As far as I know, you can't go directly to Advanced Search, but it is really quick and easy to access, because you just go to Search (Windows logo key + F) and click on the Advanced Search button in the upper right-hand corner.

Here's some info on how to customize your Indexed Locations, (plus you can type Advanced Search in the Help section of Windows Explorer, for a ton of additional information):

(By the way, the smaller the list of indexed files, the faster your searches will perform. The larger the list is, the more detailed your results will be, and the more slowly the search will run.)

How do I add and remove new files or locations to the index?


  1. Click Start, type Index in the search field, and select Indexing Options when it becomes available.
    Click the Modify button. The Indexed Locations window opens.
    If the panes in the Indexed Locations window are empty, click Show all Locations. Allow the action to continue if prompted.
    To add a location, select its check box in the Change selected locations list, and then click OK.
    To add a folder, but not all of its subfolders, expand the folder, and then clear the check box next to any folder you don’t want to index.
  2. To remove a location, clear its checkbox in the Change selected locations list, and then click OK.
How do I add a file type to the index that is not currently included?



If you use an unusual file type that’s not already included in the index, you may wish to add it to future searches.
  1. Click Start, type Index in the search field, and select Indexing Options when it becomes available.
    Click the Advanced button. If prompted, allow the action to continue.
    Select the File Types tab.
    Enter the file type in the text box, and then click Add new extension.
  2. Click Index Properties Only or Index Properties and File Contents, and then click OK.
  3. (Once in the Advanced Search screen, you can further customize your Indexed Locations by clicking on Indexed Locations, and at the bottom of the list, select: Choose search locations. This brings up a new window that allows you to make additional choices.)
Improving Windows searches using the index: Frequently Asked Questions


What is the index?

Similar to the way the index in a book helps you to keep track of its contents, the index in Windows keeps track of the files on your computer. The index stores information about files, including the file name, date modified, and properties like author, tags, and rating. You will never see the index, but it is used by Windows to perform very fast searches of the most common files on your computer.


What is the index used for?

The index is used to make searching for files much faster. Instead of looking through your entire hard disk for a file name or file property, Windows scans the index, which allows most results to appear in a small fraction of the time that a search without the index would take.


What files are indexed?

By default, all of the most common files on your computer are indexed. Indexed locations include all of the files in your personal folder (such as Documents, Pictures, Music, and Videos), as well as e‑mail and offline files. Files that are not indexed include program files and system files. The locations that contain those files are not indexed because you rarely need to search those files, and so not including them in the index makes your searches perform faster.


How do I know what locations are in the index?



To see the complete list of locations that are indexed:
How do I add new files or locations to the index?

  1. Click to open Indexing Options.
    Click Modify.
  2. To add a location, select its check box in the Change selected locations list, and then click OK.
    If you don't see all of the locations on your computer in the Change selected locations list, click Show all locations.
    GetContent.aspx
    If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
    If you want to include a folder but not all of its subfolders, expand the folder, and then clear the check box next to any folder you don't want to index. These folders will appear in the Exclude column of the Summary of selected locations list.
Can I index my entire computer so all searches are fast?

You shouldn't. If you make the index too large, or if you include system file locations like the folder called Program Files, your routine searches will slow down because the index will not perform well. For best results, we recommend that you only add folders to the index that contain your personal files.


How do I remove a location I rarely use from the index?

  1. Click to open Indexing Options.
    Click Modify.
  2. To remove a location, clear its check box in the Change selected locations list, and then click OK.
When I perform a search, is the entire index searched every time?

Usually. By default, searches in the Search folder are conducted using the index, but it is also possible to search using other locations.


How do I change the hard disk or folder in which the index is stored?



If you add a faster hard disk to your computer, you might want to move the index to this location for better performance. Here's how:
  1. Click to open Indexing Options.
    Click Advanced.
    GetContent.aspx
    If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
  2. Click Select new, and then specify a new location for your index.
I want to search for a file type that is not currently being indexed. How do I add a file type to the index?



If you use an unusual file type that is not currently recognized by the index, you can add it to the index yourself. Here's how:
  1. Click to open Indexing Options.
    Click Advanced.
    GetContent.aspx
    If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
    Click the File Types tab.
    Enter the file type in the text box, and then click Add new extension.
  2. Click Index Properties Only or Index Properties and File Contents, and then click OK.
When should I rebuild my index?



Your index requires virtually no maintenance. However, if the index has problems finding files that you know should be located in an indexed location, you might need to rebuild the index. This can take a long time to complete, so avoid performing this step unless you have given the index enough time (several hours) to correct any problems first. To rebuild the index:
  1. Click to open Indexing Options.
  2. Click Advanced, click the Index Settings tab, and then click Rebuild.
    GetContent.aspx
    If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
How do I restart the Windows Search service?

  1. Click to open Administrative Tools.
    Double-click Services.
    GetContent.aspx
    If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
    In the Services dialog box, under Name, double-click Windows Search.
  2. In the Windows Search Properties dialog box, click Stop, then click Start, and then click OK.
Why do I need to have BitLocker or a non-Microsoft drive encryption solution enabled before indexing encrypted files?

If you choose to add encrypted files to the index and you are not using a full volume encryption solution for the location of the index, encrypted data from your files—for example, text from a Microsoft Word document—will be added to the index. The index is obscured so that it is not easily readable if someone tries to open the index files, but it does not have strong data encryption. If someone were to gain access to your computer, they could extract your data from the index. Therefore, the location of the index should also be encrypted to help protect your indexed data.


How can I find the location of the index?



Follow these steps:
  1. Click to open Indexing Options.
  2. Click Advanced. The current location of the index is listed under Index location.
 

My Computer

System One

  • Manufacturer/Model
    HP Pavillion dv5t (Gen. 1)
    CPU
    Intel(R) Core(TM)2 Duo Processor T9400 (2.53 GHz)
    Memory
    4GB DDR2 System Memory (2 Dimm)
    Graphics card(s)
    512 MB NVIDIA GeForce 9600M GT
    Monitor(s) Displays
    15.4" diagonal WSXGA+ High-Definition HP BrightView Widescreen Display
    Screen Resolution
    1680 x 1050
    Hard Drives
    320GB 5400RPM SATA Hard Drive with HP ProtectSmart Hard Drive Protection
    Mouse
    built in - Synaptics TouchPad V6.5 on PS/2 Port
    Keyboard
    built in - HP
    Internet Speed
    max
    Other Info
    ~ Intel Next-Gen Wireless-N Mini-card w/Bluetooth ~ Blu-Ray ROM DVD+/-R/RW ~ Integ. HDTV Hybrid Tuner ~ 12 Cell Battery ~ MS Office (Home Premium) 2007 ~
How do I add and remove new files or locations to the index?

but i don't see any difference!
the pics are on a separate drive in the computer.
and yes the drive is in the indexed list


computer is

PCBRAND: HP Pavilion
Model #: m9360f
 

My Computer

Back
Top