Plz help. I used my USB device whole day and unplugged it. When i replugged my device it was located by the computer but the autorun program did not run. I am said that my device could not start with a code error 10. I unistall my deveice and when windows tried to re-install the driver for my USB device i am siad that preconfigured drivers cannot be found and that installation of driver failed. I don't know wat 2 do. please help. I use an AMD Sempron with 1GB Ram.
USB Device not working
- Thread starter Tiyah
- Start date
Lorien
Account Suspended
I'm assuming you're using Vista and that the USB device is a flash drive or something very similar. If wrong, please clarify the situation.
This is from the third article below, but worth checking first to see if we can try to confirm the device is working:
1. Do you have any other USB storage device? Does it work well on the computer?
2. Try to plug the device to another USB port without using any USB Hub device.
3. Does the USB device work well on other computers?
See if the following article helps (including the Mr. fixit troubleshooter): Description of Code 10-related errors that Device Manager generates in Windows-based computers. You may need to visit the manufacturer of the USB device to obtain new drivers for that device and your version of Vista.
Here's another article on how to fix Code 10 errors with USB devices in Vista: How to Fix Windows Vista Code 10 | eHow.com.
Try the procedures provided in the answer in the following thread: Windows vista home premium WPD problem on USB-stick with exlamation mark & error code 10.
I hope one of these solutions works. If not, post back and we'll try to find some others.
Good luck!
This is from the third article below, but worth checking first to see if we can try to confirm the device is working:
1. Do you have any other USB storage device? Does it work well on the computer?
2. Try to plug the device to another USB port without using any USB Hub device.
3. Does the USB device work well on other computers?
See if the following article helps (including the Mr. fixit troubleshooter): Description of Code 10-related errors that Device Manager generates in Windows-based computers. You may need to visit the manufacturer of the USB device to obtain new drivers for that device and your version of Vista.
Here's another article on how to fix Code 10 errors with USB devices in Vista: How to Fix Windows Vista Code 10 | eHow.com.
Try the procedures provided in the answer in the following thread: Windows vista home premium WPD problem on USB-stick with exlamation mark & error code 10.
I hope one of these solutions works. If not, post back and we'll try to find some others.
Good luck!
My Computer
System One
-
- Manufacturer/Model
- Dell Inc. MP061 Inspiron E1705
- CPU
- 2.00 gigahertz Intel Core 2 Duo 64 kilobyte primary memory
- Motherboard
- Board: Dell Inc. 0YD479 Bus Clock: 166 megahertz
- Memory
- 2046 Megabytes Usable Installed Memory
- Graphics card(s)
- ATI Mobility Radeon X1400 (Microsoft Corporation - WDDM) [Di
- Sound Card
- SigmaTel High Definition Audio CODEC
- Monitor(s) Displays
- Generic PnP Monitor (17.2"vis)
- Screen Resolution
- 1920 x 1200 pixels
- Hard Drives
- Hitachi HTS541616J9SA00 [Hard drive] (160.04 GB) -- drive 0, s/n SB2411SJGLLRMB, rev SB4OC74P, SMART Status: Healthy
- Case
- Chassis Serial Number: 5YK95C1
- Mouse
- Logitech HID-compliant Cordless Mouse
- Keyboard
- Standard PS/2 Keyboard
- Internet Speed
- 1958 Kbps download ; 754.8 Kbps upload
- Other Info
- Optiarc DVD+-RW AD-5540A ATA Device [CD-ROM drive] Dell AIO Printer A940 Conexant HDA D110 MDC V.92 Modem 6TO4 Adapter Broadcom 440x 10/100 Integrated Controller Broadcom 802.11n Network Adapter Microsoft ISATAP Adapter Teredo Tunneling Pseudo-Interface Router Linksys / WRT54G -01