Physx Instalation Problems! {Fotos Inside}

[ThÉoPatrizi]

Hi there, this iss my first post here cause i allready looked in all the google possible solutions for my problem and still did not solve it!
Than I found you guys over here, I hope tha with the help of you guys i get happy and use physx in my PC.

When I begin installng physx every thing goes ok, but when it is about to finish......

Translating things that is not in english:
Error 1935. Error when installing assembly. OR "Error when trying to install assembly"
Last LINE: "Contact help and suport for more information"

That is the problem!


I have unistalle drivers and re-installed them allreadey but it still does not work!

Do you guys have any idea why is that the message apears?
Please help me!

 

[Ultimate User]

Disable your user access control go start search>> type>>msconfig>> select the "services" tab and disable user access control. I also noted the error quoted x86 Architecture which is 32-bit Vista according to your sig you have x64 which would require you to download the x64 (64 bit) system software

 

[johngalt]

Don't disable UAC - that is hogwash.

I have installed PhysX on this machine 3 times without disabling UAC.

First of all, which video card do you have?

 

[Brink]

From other removed post:

Hi there......

I am geting this message at the and of the physx instalation!!!

Translating things that is not in english:
Error 1935. Error when installing assembly. OR "Error when trying to install assembly"
Last LINE: "Contact help and suport for more information"

I have unistalle drivers and re-installed them allreadey but it still does not work!
The UAC is desactivated!

Hello ThÉoPatrizi,

If you have the Geforce 8, 9, or 200 series card, then you might use the new 177.83 video drivers instead. They include the PhysX software.

http://www.vistax64.com/graphic-cards/139495-latest-nvidia-forceware-video-drivers.html

Hope this helps,
Shawn

 

[ThÉoPatrizi]

Hi there.....
I just removes and deleted de nvidia display drivers and downloaded the 177.83 from the site.
It still gives me the message at the end!

I got a 8500gt video card.

 

[ThÉoPatrizi]

Re: NVIDIA PhysX System Software

Hey there brink, i did it and still gives me that XXX message! =/

I think i am going to format the PC, i cant get any updates too.....
office 2007 sp1, gives the error 1935 that on microsoft suport means:

"Several root causes may cause error 1935 or error 78F during the installation of the 2007 Microsoft Office suite Service Pack 1 (SP1). Typically, this issue occurs when the 2007 Office suite was originally installed by using a temporary storage device."

I did not install from temporary BUT.... the erros i have is does 2 for most off the updates!

 

[johngalt]

As you have said in yet another thread, you are experiencing more than just issues with this - and I agree - you should probably look at formatting and reinstalling.

One word of advice - do not install any drivers before installing SP1. Also, don't use the CDs that came with your hardware - get only the latest drivers from the respective manufacturers' websites.

 

[ThÉoPatrizi]

Yeah, i wil do that!
May it be space problema?
I have lesse then 4g on C:...

Thanks

Do you guys desable de UAC?

 

[johngalt]

4 GB *free*?

And no, I run UAC enabled all the time.

 

[ThÉoPatrizi]

Yeh, it is 3.89 free space.......
i use router to, dlink di524 but i always downloaded the updates this way!
And de router is DMZ activted for my PC.

I forgot to say that I am havin erros to install de Office 2007 SP1 to!

 

[Brink]

I would say that the low free space issue may be the cause of this problem. You will need to free up some space or get a new larger hard drive. I would clear at least 10 GB of space to see if that helps first.

I have UAC turned on as well.

The Office 2007 issue should be posted in the Microsoft Office subforum in the Software forum if it is not related to this same low free space issue here. This way you will get better help from there on it.

 

[ThÉoPatrizi]

Thanks a lot again and sorry for posting about office over here.
I made mistake with de hard drive.......
I got a 500gb raid-0 array but left only 30gb for windows, wanting to leave as much as possible for mkvs, and games.......
I'll upgrade to a 1TB rai-o array soon!

Thanks.

 

[Brink]

Yeah, with Vista Ultimate you want to have at minimum 40 GB for the drive size and 15 GB of free space.

http://www.microsoft.com/windows/windows-vista/get/system-requirements.aspx

 

[ThÉoPatrizi]

DAM IT!
I am thinking about leave 50gb partition after the format, do you think it is ok?

 

[Brink]

Should be ok as long as there is some free space to.

 

[johngalt]

Make it 60 GB (61440 MB) when formatting and creating a partition.

40GB for Vista + 15GB free = 55GB to begin with....

 

[ThÉoPatrizi]

Ok, I was thinking about that!!!

PS: How do you make the ecxat count for 60gb in MB?!
Thanks.

 

[johngalt]

Read my post again.

 

[ThÉoPatrizi]

I am talking about this!
"61440 MB"

 

[johngalt]

When you create a partition when installing Vista, it will ask you for the partition size in MB - so you enter 61440.

Sorry, I thought that would be self evident, hence my last post.