Hi, any advice would be much appreciated.
I have a HP S3140 Pavilion Slimline desktop running Vista Home Premium.
I've been running the PC since new with an adaptor for the monitor cable where this inputs to the PC. The technical side of it is beyond my knowledge but I was advised when I bought the PC that I had to use with adaptor with the secondhand monitor I have.
Last year however the PC ceased to output to the monitor and by trial and error I realised that it would now only work without the adaptor.
More recently I began to experience booting problems -the PC sounds as if it is whirring into action as usual but then gets 'stuck' and there is no output whatsoever by way of error messages or anything else. The problem has been intermittent -sometimes it will boot normally other times not at all. I have run just about every HP diagnostic I could find and also the 'start up repair' (latter didn't appear to recognize a problem). The only test which failed was the PCI express status test (code MB152-15W.
Then lo and behold there was no output to my monitor a few nights ago so I used the adaptor I had dispensed with using last year and all was fine again; my suspicious mind lead me to run the PCI test again which now passed.....
Then tonight, again no output to the monitor -removed aforesaid adaptor again and all was well, ran the PCI test again and it failed. 2 Vista updates were automatically installed when I shut down last night but the content of them does not appear as if it would have any relevance to my problems.
If anyone could enlighten me what is happening here and whether the PCI failure is in any way linked to the booting problem that would be fantastic.
I have a HP S3140 Pavilion Slimline desktop running Vista Home Premium.
I've been running the PC since new with an adaptor for the monitor cable where this inputs to the PC. The technical side of it is beyond my knowledge but I was advised when I bought the PC that I had to use with adaptor with the secondhand monitor I have.
Last year however the PC ceased to output to the monitor and by trial and error I realised that it would now only work without the adaptor.
More recently I began to experience booting problems -the PC sounds as if it is whirring into action as usual but then gets 'stuck' and there is no output whatsoever by way of error messages or anything else. The problem has been intermittent -sometimes it will boot normally other times not at all. I have run just about every HP diagnostic I could find and also the 'start up repair' (latter didn't appear to recognize a problem). The only test which failed was the PCI express status test (code MB152-15W.
Then lo and behold there was no output to my monitor a few nights ago so I used the adaptor I had dispensed with using last year and all was fine again; my suspicious mind lead me to run the PCI test again which now passed.....
Then tonight, again no output to the monitor -removed aforesaid adaptor again and all was well, ran the PCI test again and it failed. 2 Vista updates were automatically installed when I shut down last night but the content of them does not appear as if it would have any relevance to my problems.
If anyone could enlighten me what is happening here and whether the PCI failure is in any way linked to the booting problem that would be fantastic.