huge bios problem - please help

K

KG4mvp

New Member
Hello,

I own a Lanparty nf4 sli dr motherboard and have recently downloaded and flashed the latest bios from the manufacturer's website. As recommended by the manufacturer, I used winflash to flash the bios. Everything seemingly went well, and the program asked to reboot and I did. Now the computer won't start up. It will get as far as the motherboard logo, but not far enough for me to entire the bios. I don't know what to do. I tried to contact the manufacturer via the phone and have been put on waiting every time. Anyone have any advice or suggestions? My computer does not have a floppy drive by the way.
 

My Computer

System One

Have you tried clearing the cmos via the jumper next to the battery?

I have just looked at the manufacturers website, and it looks like your mobo has a feature called cmos reloaded, this has bios recovery tools, if you have your manual about look it up.
 

My Computers

System One System Two

  • Operating System
    Windows 11 Workstation
    Manufacturer/Model
    doofenshmirtz evil incorporated
    CPU
    Ryzen 9 5950X
    Motherboard
    Asus ROG Crosshair VIII Formula
    Memory
    Corsair Vengeance RGB PRO Black 64GB (4x16GB) 3600MHz AMD Ryzen Tuned DDR4
    Graphics card(s)
    ASUS AMD Radeon RX 6900 XT 16GB ROG Strix LC OC
    Sound Card
    Creative
    Monitor(s) Displays
    3 x27" Dell U2724D & 1 x 34" Dell U3415W
    Hard Drives
    Samsung 980 Pro 1TB M.2 2280 PCI-e 4.0 x4 NVMe Solid State Drive
    PSU
    1500W ThermalTake Toughpower
    Case
    ThermalTake Level 10 GT
    Cooling
    Enermax Liqtech 240
    Mouse
    Logitech Performance MX
    Keyboard
    Surface Ergonomic.
    Internet Speed
    350 Mb/s
    Other Info
    WinTV NovaTD HP CP1515n Color Laser Sony BD-5300S-0B Blu-ray Writer Microsoft LifeCam Cinema APC 750i Smart UPS
  • Operating System
    windows 10
    Manufacturer/Model
    Surface Pro 3
    CPU
    1.9GHz Intel Core i5-4300U (dual-core, 3MB cache, up to 2.9GHz with Turbo Boost)
    Memory
    4GB
    Monitor(s) Displays
    12" Multi Touch
    Screen Resolution
    2160 x 144
    Hard Drives
    128GB
    Mouse
    Logitech
    Keyboard
    yes
    Internet Speed
    350 Mb/s
Thanks a lot for the reply,

I initially tried resetting the cmos using the jumper technique, but that didn't work. However, after finally managing to contact the manufacturer, they suggested something similar. Following their advice I disconnected the psu, removed the cmos battery, and rearranged the jumper settings. After waiting a recommended 30 minutes, I restored everything to its original state and everything worked fine.
 

My Computer

System One

well i jus got a standard p5k board...updated the bios from 704 to the beta 0805...some of my oc settings had to be reset and set again...not that big of a deal...but now everything works..except my Ai Suite...which im guessn my sensors and all with my bios? but speedfan and pc probe II works...so something wrong with the program...hmm i mite jus uninstall and reinstall....or BIOS?? i dont kno
 

My Computer

System One

@mathews , NEVER update your BIOS with overclocked settings.Always reset it to stock,update BIOS and then Overclock again if you want to.

It may have worked for you now but dont try it again.
 

My Computer

System One

  • CPU
    Intel Core 2 Duo T5800 @ 2.0Ghz
    Motherboard
    Intel
    Memory
    4GB
    Graphics card(s)
    Nvidia 9650M GT
    Monitor(s) Displays
    Asus N80VN-X1 Laptop
    Screen Resolution
    1280 X 800
    Hard Drives
    1 X 250GB 5200 RPM
    Internet Speed
    11 MBPS
    Other Info
    XBOX 360 Controller | Vista X64 | Simpledrive 500GB
You must log in or register to reply here.
Back
Top