"identifying network connection"

hdbg62

hdbg62

Member
I experience the "identifying 'network'" only when I sign on automatically, yet I do have an internet connection and networking works flawlessly; when I sign on manually there's only a very brief instance of it and after that all is normal. After literally spending days on this and trying all sorts of configurations for the router I still can't avoid this issue when I set networking properties to connect automatically.

Got a late model Dell PC/Vista Home Premium 32 which connects with no problems to my AT&T dry loop DSL Siemens 4100 modem which is connected to a new Linksys WRT54GS router which is picked up by an HP laptop/Vista Ultimate 32 with BROADCOM 802.11 b/g network adapter and NVIDIA nforce networking controller. As far as router configuration goes, I have tried the following applicable settings; Automatic Configuration-DHCP, Mixed Wireless Network Mode, Wireless Channel 6, SSID Broadcast as enabled and as disabled, Security Mode as WPA Personal and as WPA2 Personal, WPA Algorithms as AES, TKIP or AES+TKIP respectively. Also I have tried various connection scenarios in Wireless Network properties.

Again the bottom line is that while I do have a network and internet connection, I can't sign on automatically without the constant "identifying 'network'" issue and when I sign on manually all is well. Never worked with a router before, Linksys customer support is an absolute trip with no destination and I'm hoping someone here might give me a few clues.
 

My Computer

System One

  • Manufacturer/Model
    Dell Inspiron 530
    CPU
    Intel Core 2 DuoE4500 2.20G
    Memory
    3.00G DDR2, 667MHz
    Graphics card(s)
    Intel G33/G31 Express 320
    Sound Card
    Realtec ALC888 (7.1 Channel audio)
    Monitor(s) Displays
    Dell 22" E228WFP
    Screen Resolution
    1680x1050
    Hard Drives
    Samsung HD501LJ ATA 500 G PBDS DVD+RW DH-16W1S ATA MAXTOR 320 G USB
    Internet Speed
    5.28 Mb/s Down, 0.64 Mb/s Up, ATT Dry Loop DSL
Well, maybe I fixed that *#+%X! thing; after a few more hours of trying, anyway. Got the PC Local Area Connection still set to 'Private' but set the Wireless Network Connection to 'Public' and in Wireless Network Properties I once more checked 'Connect automatically' and 'Connect even if not broadcasting'. Seems to work fine now. When it connects automatically it spends about 30 seconds identifying 'Public Network' but then settles down to my named network.
 

My Computer

System One

  • Manufacturer/Model
    Dell Inspiron 530
    CPU
    Intel Core 2 DuoE4500 2.20G
    Memory
    3.00G DDR2, 667MHz
    Graphics card(s)
    Intel G33/G31 Express 320
    Sound Card
    Realtec ALC888 (7.1 Channel audio)
    Monitor(s) Displays
    Dell 22" E228WFP
    Screen Resolution
    1680x1050
    Hard Drives
    Samsung HD501LJ ATA 500 G PBDS DVD+RW DH-16W1S ATA MAXTOR 320 G USB
    Internet Speed
    5.28 Mb/s Down, 0.64 Mb/s Up, ATT Dry Loop DSL
Sure am glad we keep old posts. For some unknown reason I encountered the same problem again today and after wasting the whole day on it I remembered my post; again, it solved the problem. Just don't understand why the problem is there in the first place!
 

My Computer

System One

  • Manufacturer/Model
    Dell Inspiron 530
    CPU
    Intel Core 2 DuoE4500 2.20G
    Memory
    3.00G DDR2, 667MHz
    Graphics card(s)
    Intel G33/G31 Express 320
    Sound Card
    Realtec ALC888 (7.1 Channel audio)
    Monitor(s) Displays
    Dell 22" E228WFP
    Screen Resolution
    1680x1050
    Hard Drives
    Samsung HD501LJ ATA 500 G PBDS DVD+RW DH-16W1S ATA MAXTOR 320 G USB
    Internet Speed
    5.28 Mb/s Down, 0.64 Mb/s Up, ATT Dry Loop DSL
I had this problem with my laptop also.
I restarted the laptop with the wireless connection switch shut off.
After reboot was complete, then I turned the switch back on.
Then open control panel, Network & Sharing Center.
Should be your default network now & private network status.
Across from that click Customize.
At the bottom of the pop-up click 'Merge or delete Network Locations'.
In the pop-up if there is a Network that is not in use delete it, then close/cancel the remaining open windows.
I have a third party software firewall (Comodo) installed on my laptop which I use and thought I had the windows firewall disable but I guessed wrong.
So I went to start menu, control panel, windows firewall, and found that even though I had it turned off it was still monitoring my system.
To disable the Windows Firewall on a network connection:

1. Click Start and click Control Panel.
2. Click then select Windows Firewall.
3. Click Change Settings.
4. From the window that appears, click the Advanced tab.
5. Remove the check beside the connection that you want to disable the Windows Firewall for.
6. Click OK.
Then from the start menu, run command, type 'services.msc' without the quotation marks.
Find windows firewall, highlight and right click, then click properties.
At service status click Stop.
Then from the 'startup type' drop down menu click 'Disabled'.
Click Apply, then OK.
Reboot.
After the reboot I received a window asking what type of network I would like, I chose Home/Private.
Then Control Panel, Network & Sharing Center.
Should be a Private Network now, click Customize.
In open window click Merge or Delete Network locations.
If there are 2 click on the 1 not being used then click Merge.
In the open window select the 1 being used and click Merge, Apply/OK.
That's all folks, good to go.
 

My Computer

System One

You must log in or register to reply here.
Back
Top