I have a Vista Home Premium edition laptop that I keep upstairs. I would like to be able to print to a HP 2210si printer downstairs. There is no network currently established. I'm ditching an old computer downstairs that is virus-infected, and I would like to be able to leave the printer down there with no computer attached to it, and use the laptop upstairs.
How to print from a Vista stand-alone to a remote printer
- Thread starter kschelte
- Start date
Hello, is that printer wireless ? i did not check it , figure you could tell me quicker.
My Computer
System One
-
- Manufacturer/Model
- Emachine ET 1161-05
- CPU
- AMD Athlon 64 LE-1640
- Motherboard
- eMachines MCP61PM-GM (Socket AM2 )
- Memory
- 2.00 GB Dual-Channel DDR2 @ 387MHz (6-6-6-18)
- Graphics card(s)
- Acer E181H (1280x768@60Hz) 128MB GeForce 6150SE nForce 430 (
- Sound Card
- Realtek High Definition Audio
- Monitor(s) Displays
- Name Acer E181H on NVIDIA GeForce 6150SE nForce 430
- Screen Resolution
- 1280x768 pixels
- Hard Drives
- ST316081 5AS SCSI Disk Device
- PSU
- MCP61PM-GM 9000 NVIDIA Chipset Model MCP61 Chipset Revisio
- Case
- Tower
- Cooling
- Fan Speed 1247 RPM
- Mouse
- PS/2 Compatible Mouse
- Keyboard
- Standard PS/2 Keyboard
- Internet Speed
- http://www.speedtest.net/result/1538974261.png
Unfortunately, no. The printer is about 5 years old. It's network-able, but not wireless.
My Computer
Changing a USB connection to a wired (Ethernet) connection
Delete the USB-connected printer from the computer.
Click Start .
Click Settings .
Click Control Panel .
Double-click Printers and Faxes .
Right-click on the printer that is connected using the USB connection and then click Delete .
Disconnect the USB cable from the back of the all-in-one.
Connect one end of an Ethernet cable to the Ethernet port on the all-in-one.
Connect the other end of the Ethernet cable to an available port on the router, switch, or access point.
Insert the product CD into the CD-ROM drive on the computer. The startup screen displays automatically.
If the startup screen does not display automatically, use the following steps to start the installation manually:
Click Start .
Click Run . The Run dialog box displays.
In the Open: text box, type D:\setup.exe , where D is the letter of the CD-ROM drive, and then click OK .
Select Add a Device and then click Next .
Follow the instructions that display on the screen.
When prompted for the connection type, select Through the network and then click Next
HP PSC 2210 All-in-One Printer series*-* HP All-in-One Products - Changing the HP All-in-One From a USB Connection to a Network Connection - c00750079 - HP Business Support Center
See if this helps you out . Post results please
Delete the USB-connected printer from the computer.
Click Start .
Click Settings .
Click Control Panel .
Double-click Printers and Faxes .
Right-click on the printer that is connected using the USB connection and then click Delete .
Disconnect the USB cable from the back of the all-in-one.
Connect one end of an Ethernet cable to the Ethernet port on the all-in-one.
Connect the other end of the Ethernet cable to an available port on the router, switch, or access point.
Insert the product CD into the CD-ROM drive on the computer. The startup screen displays automatically.
If the startup screen does not display automatically, use the following steps to start the installation manually:
Click Start .
Click Run . The Run dialog box displays.
In the Open: text box, type D:\setup.exe , where D is the letter of the CD-ROM drive, and then click OK .
Select Add a Device and then click Next .
Follow the instructions that display on the screen.
When prompted for the connection type, select Through the network and then click Next
HP PSC 2210 All-in-One Printer series*-* HP All-in-One Products - Changing the HP All-in-One From a USB Connection to a Network Connection - c00750079 - HP Business Support Center
See if this helps you out . Post results please
My Computer
System One
-
- Manufacturer/Model
- Emachine ET 1161-05
- CPU
- AMD Athlon 64 LE-1640
- Motherboard
- eMachines MCP61PM-GM (Socket AM2 )
- Memory
- 2.00 GB Dual-Channel DDR2 @ 387MHz (6-6-6-18)
- Graphics card(s)
- Acer E181H (1280x768@60Hz) 128MB GeForce 6150SE nForce 430 (
- Sound Card
- Realtek High Definition Audio
- Monitor(s) Displays
- Name Acer E181H on NVIDIA GeForce 6150SE nForce 430
- Screen Resolution
- 1280x768 pixels
- Hard Drives
- ST316081 5AS SCSI Disk Device
- PSU
- MCP61PM-GM 9000 NVIDIA Chipset Model MCP61 Chipset Revisio
- Case
- Tower
- Cooling
- Fan Speed 1247 RPM
- Mouse
- PS/2 Compatible Mouse
- Keyboard
- Standard PS/2 Keyboard
- Internet Speed
- http://www.speedtest.net/result/1538974261.png