therock
Member
I have been searching for a way to get my Snipping tool back in my vistax64 system. It started with the common errors saying there is a problem and to restart and so on.
I installed a Wacom Bamboo tablet on a Vista x86 laptop and a x64 Desktop both SP2.
The laptop has had no issues and the x64 desktop ran the snipper fine for months afterwords but eventually lost the tool's functionality. So do not blame the Wacom in my case. I say this because I have read elsewhere it was a suspect cause.
After reading about some folks doing an Office 2007 Office diagnostics from the Outlook Help menu I tried it and it worked but there is a different behaivor.
I have dual displays and before it went bad it would open up in one display but now it opens the selection area across both displays. That's OK with me, I just wanted to report.
I installed a Wacom Bamboo tablet on a Vista x86 laptop and a x64 Desktop both SP2.
The laptop has had no issues and the x64 desktop ran the snipper fine for months afterwords but eventually lost the tool's functionality. So do not blame the Wacom in my case. I say this because I have read elsewhere it was a suspect cause.
After reading about some folks doing an Office 2007 Office diagnostics from the Outlook Help menu I tried it and it worked but there is a different behaivor.
I have dual displays and before it went bad it would open up in one display but now it opens the selection area across both displays. That's OK with me, I just wanted to report.
My Computer
System One
-
- Manufacturer/Model
- Home Build
- CPU
- Intel Q6600 G0
- Motherboard
- Gigabyte GA-EP45-UD3P
- Memory
- Corsair 8GB
- Graphics card(s)
- POWERCOLOR AX3650 512M DDR2
- Sound Card
- On board
- Monitor(s) Displays
- Samsung 215TW
- Screen Resolution
- 1600
- Hard Drives
- 2X WD 750GB RE3 RAID-1
- PSU
- 610W CORSAIR Modular
- Case
- Cheapo Rosewell
- Cooling
- Rosewell Fans and CPU Cooler
- Mouse
- Logitech MX Revolution
- Keyboard
- Logitech Access Keyboard 600
- Internet Speed
- 15962